Goulding

S200x600_img_20150720_224558_1437529600

Lives in: Newfoundland, CAN

Member since: 03/23/15

Recent Activity Filter:

Added reply in a thread Go big or go home 12/12/2017 7:18 AM

this is me in 2011. the picture is at 130 feet the ramp seen is not the ramp used. the video is at 150 I almost let go on that one. https://www.youtube.com/watch?v=qZOPqEFYkJk

Added reply in a thread Where'd your number come from? 12/8/2017 4:59 AM

My family had a friend that was paralyzed in a race back in 1992, his number was 41 I used his number as a tribute to him was my excuse when I was 10. The first time I went to a CMRC race they assigned me the number 147 and I ran that for a few years. ... more »

Added reply in a thread 2017 KTM 250sx keeps fouling plugs 10/16/2017 5:13 PM

I am using the motorex oil that Ktm recommends.

Added reply in a thread 2017 KTM 250sx keeps fouling plugs 10/16/2017 8:57 AM

I am up in Newfoundland. Riding elevation is at sea level riding temps between 10-30 Celsius all summer and am running stock jetting. I mix my gas at 60:1 with zero jetting issued at all. Haven't fouled a plug yet in my first 34 hours.

Added reply in a thread Show us your 17 250SX 9/17/2017 7:06 AM

... more »

Added reply in a thread 2017 250sx bogging and hard starting. 7/1/2017 6:14 AM

Ok so I just put the bike together. Clean carb and v force installed. Still no start. What should I look at next?

Added reply in a thread 2017 250sx bogging and hard starting. 6/28/2017 12:10 PM

Gave my carb to the dealer owner and he just texted me that mine had a filing down in my float bowl as well.

Added reply in a thread 2017 250sx bogging and hard starting. 6/26/2017 2:29 PM

Is this the issue I wonder?

Added reply in a thread 2017 250sx bogging and hard starting. 6/25/2017 9:00 AM

I did some reading last night when I left the emergency room and I am leaning toward the reeds as well. the air filter is clean as I just put it in the night before

Started new thread 2017 250sx bogging and hard starting. 6/24/2017 2:48 PM

So today was the first race of the year for us in Newfoundland. I have 12.5 hours on my bike and never had a hitch. When I went out for my second practice the bike had started cutting power. I was holding it pinned and it started to stall out then picked ... more »

This forum thread has 20 replies

Added reply in a thread Stupid two stroke question 5/20/2017 6:47 PM

To try and answer the sensible questions I got the bike for the challenge. After riding 450's for 8 years I wanted a change. I do not have any other issues on the other jumps and I have actually surprised my self how comfortable I am for one track day ... more »

Started new thread Stupid two stroke question 5/20/2017 3:14 PM

Ok so I recently got a 17 250 sx. My first two stroke since 2003. I have ridden a few over the years with out any issues but I need some help. Today was my first day on the track with the bike but am having troubles with one jump. It's a 80 foot table ... more »

This forum thread has 19 replies

Added reply in a thread 2017 sx 250 5/6/2017 11:40 AM

Wouldn't be able to tell you. Never started the bike with the stock silencer.

Added bike check 2017 Ktm sx 250 5/6/2017 3:25 AM
S780_img_2514
Added reply in a thread 2017 sx 250 5/6/2017 3:20 AM

Been a while since my last update. Here is the finished product. One thing I couldn't get over Is the size of the fmf silencer vs the factory one. Got 3.8 hours on the bike so far and am loving it so far! ... more »

Started new thread Aer 48 max air pressure 4/30/2017 4:09 PM

What is the max air pressure you can run in these forks? Race techs website says for me to run 175 psi but that seems like a lot to me

This forum thread has 5 replies

Added reply in a thread TORONTO SUPERCROSS PARTY 3/3/2017 4:14 PM

What time does this kick off tonight?

Added reply in a thread 2017 sx 250 2/25/2017 2:15 PM

Can someone point me in the direction for some orange brigade back grounds at a good price? I emailed decal works and they wanted $120 american by the time they land at my house in Canada with the conversion it's almost $200.00. A bit to much for some ... more »

Added reply in a thread Give me some parts supplier options. 2/19/2017 9:51 AM

There should be a number stamped on the side of the bearing race. What I have done is went to a skf industrial store with the number had them match it and got it off them for cheaper then a all balls kit

Added reply in a thread Oakland SX Bench Racing - Night Show 2/4/2017 5:42 PM

Dean looks worried