Joyner41

S200x600_img_5727_1487777399

Lives in: Petaluma, CA USA

Member since: 01/17/17

Recent Activity Filter:

Added a comment about feature Vital MX 12 Days of MXmas: Day 5 12/12/2017 5:08 AM
C50_img_5727_1487777399

Does this put Christmas on level 100?

0 0 0

This feature has 281 comments.

Added a comment about feature Vital MX 12 Days of MXmas: Day 3 12/10/2017 8:02 AM
C50_img_5727_1487777399

This would sure be better than coal!

0 0 0

This feature has 284 comments.

Added reply in a thread WTB RM125 Parts 10/20/2017 7:21 AM

I’ve got a VForce3 with exactly 5.0 hours on it. I only pulled it off because it will not work with my new Keihin carb, and will rub on one of the bolts. If you’re interested, I’d be willing to let it go. PM me.

Added reply in a thread Looking for RM Seat 10/10/2017 5:35 PM

Thanks for all the response guys. Picked one up from Bman!

Added reply in a thread 04 cr125 snail 10/7/2017 11:44 AM

At the end of the day, it will always be a dead raccoon compared to a 450! Hahaha but that is the joy of the buck and a quarters. Let her sing without the 134 kit, keep it as close to stock as possible for longevity, and just ride it! I just went from ... more »

Added reply in a thread Looking for RM Seat 10/6/2017 11:40 AM

Bman I’m interested. Shoot me an email b.joyner41@gmail.com

Added reply in a thread Looking for RM Seat 10/5/2017 7:02 PM

Well shoot, that works! Complete seat or pan?

Started new thread Looking for RM Seat 10/5/2017 11:43 AM

As the title says, I’m looking for a seat for a 2004 RM125/250. Ideally, I just need the seat pan, but a decent condition seat may suffice. Anything from 01-08 will work. Any one?

This forum thread has 9 replies

Added reply in a thread Wich pipe and silencer? 9/13/2017 8:55 AM

If I'm not mistaken (this was 7 years ago) it was the 296 sparky that snapped. Too much weight for the single mount. Honestly, I'm debating my current setup and going for the Bill's MX2 Carbon and raw expansion chamber. Heard too many good reviews on ... more »

Added reply in a thread Not another RM125... 9/12/2017 8:19 AM

File to flush, sand with 400 grit and 600 grit for final, come back and hit with green or maroon scotchbrite pad with some WD40. The filing is the time consuming part.

Added reply in a thread Wich pipe and silencer? 9/6/2017 11:42 AM

FMF on my RM125, runs like a champ. I ran Pro Circuit in the past on another RM125, and feel as though it couldn't compete. Also, the mount snapped at the welds on the silencer at around 45 hours, for what it's worth.

Added reply in a thread Rm 125 build 8/20/2017 11:27 AM

Hate to push on this... but any lead on the phantom foam?? I've been looking for a while with no luck...

Added reply in a thread RM125 plug 8/16/2017 3:08 PM

I wasn't running a BR10EG on my 04, and grounding strap failed within 3 hours. I know I'll be running the R6918B-8 from now on... it's a harmonic issue with standard plugs. Chili had a great response posted in a previous forum regarding this issue.

Added reply in a thread Rm 125 build 7/28/2017 3:11 PM

How were you able to get the phantom foam?? I emailed them directly and basically got a no for an answer. Any leads?

Updated bike check 2004 Suzuki RM 125 "Gutless Wonder" 7/28/2017 2:59 PM
S780_img_5725
Added reply in a thread Not another RM125... 7/28/2017 12:46 PM

Thanks Joe! Movement in the wrist is back to about 50% which is cool. Just wanting to wrap up PT and move along with things. Ive been keeping up with your build in the downtime, and pumped to see you putting the seat time in on the two bikes. 125-er ... more »

Added reply in a thread RM125 Ti Pegs 7/28/2017 9:22 AM

I literally just bolted up a set of Propegs 2004-2015 KTM pegs, and they are STELLAR. I did end up using the stock KTM springs (cheap, i think 1.40 a piece), and I ordered a matching KTM Ti pin that bolted up just fine. In my build page there are pretty ... more »

Added reply in a thread Not another RM125... 7/24/2017 7:06 PM

Thanks guys for all the positive vibes! December can't come soon enough! Would anyone happen to have a lead on a Hinson clutch for these things? I've been keeping an eye out for months but can't find anything.

Added reply in a thread Not another RM125... 7/23/2017 9:38 PM

Finally got the bike assembled today! I will add a note that it doesn't normally take almost 3 months to just but out a top end, but unfortunately a head-on at our local club took me out of commission for a month and a half. A few more months of recovery

... more »

Added reply in a thread 06 rm125 build! 6/22/2017 2:01 PM

I purchased a set of Pro Pegs from eBay, for the 2004-2015 KTM SX/SXF, and they fit right up. Costly, but the weight savings, grip factor, and bling are bar-none. https://www.ebay.com/i/172652825265?chn=ps&dispItem=1&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmpre%253Dhttps%25253A%25252F%25252Fwww.ebay.com%25252Fi%25252F172652825265%25253Fchn%25253Dps%252526dispItem%25253D1%2526itemid%253D172652825265%2526targetid%253D322701306140%2526device%253Dm%2526adtype%253Dpla%2526googleloc%253D9032112%2526poi%253D%2526campaignid%253D852954362%2526adgroupid%253D43731965952%2526rlsatarget%253Dpla-322701306140%2526abcId%253D1128856%2526merchantid%253D114613706%2526gclid%253DCNLy68Gs0tQCFYNpfgodks8HzA%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1239480616302 ... more »