Kyle220

S200x600_img_20170520_105215683_1496182353

Lives in: USA

Member since: 11/24/16

Recent Activity Filter:

Added reply in a thread '00 Splitfire/PC KX125 9/28/2017 10:33 AM

Finally got the carbon mudflap brace on the bike!

Added reply in a thread '00 Splitfire/PC KX125 9/19/2017 8:59 PM

That's badass. If I had an actual Carmichael bike I'd never sell it haha. And thanks, that fork guard took me a long ass time to make and I'm glad it turned out good! This bike wasn't supposed to go as far as it has, but it's to the point now where I'm ... more »

Added reply in a thread What caused this 9/17/2017 9:25 PM

The crank seal behind the stator can cause that too, could be sucking air in somewhere.

Added reply in a thread '00 Splitfire/PC KX125 9/17/2017 5:07 AM

Thanks man!

Added reply in a thread '00 Splitfire/PC KX125 9/17/2017 4:38 AM

Added reply in a thread '00 Splitfire/PC KX125 9/17/2017 4:37 AM

Added reply in a thread '00 Splitfire/PC KX125 9/17/2017 12:25 AM

Added reply in a thread '00 Splitfire/PC KX125 9/17/2017 12:24 AM

Added reply in a thread '00 Splitfire/PC KX125 9/17/2017 12:23 AM

One of the pieces I've been wanting to have on the bike is the super rare DSP lower fork lug guard. I saw one on eBay for $200 but couldn't pull the trigger on it. I've made a few carbon pieces for my builds using raw carbon weave and 2 part resin so

... more »

Added reply in a thread '00 Splitfire/PC KX125 9/14/2017 4:08 PM

Hey Rob!, I made these from a Leo Vince skid plate. I had an extra one from my crf450 (which I no longer own) so I put it to good use.

Added reply in a thread '00 Splitfire/PC KX125 9/14/2017 9:49 AM

Carbon mud flap braces I machine cut and hand finished.

Added reply in a thread '00 Splitfire/PC KX125 9/9/2017 8:57 PM

You can pretty much mount it anywhere the hoses will reach, most people including the actual team mounted it at the bottom of the frame above the Kickstarter. If you zip tie it with a piece of foam behind it it will stay in place.

Added reply in a thread '00 Splitfire/PC KX125 9/8/2017 5:14 AM

Thanks man, I try!! I still have to put it on the bike!

Added reply in a thread '00 Splitfire/PC KX125 9/8/2017 12:24 AM

Added reply in a thread '00 Splitfire/PC KX125 9/8/2017 12:23 AM

Added reply in a thread '00 Splitfire/PC KX125 9/8/2017 12:18 AM

Added reply in a thread '00 Splitfire/PC KX125 9/8/2017 12:16 AM

Added reply in a thread '00 Splitfire/PC KX125 9/8/2017 12:15 AM

Added reply in a thread '00 Splitfire/PC KX125 9/8/2017 12:13 AM

Besides a few odds and ends the bike is pretty much done. I was able to have a gripper seat cover made by a company called Thrill Seekers. The PC kit suspension has been serviced by my buddy Dave at PDR Racing.

Started new thread Petty/Cycle Am Fenders. Roost Factory boost bottle 8/2/2017 3:08 PM

Email:. 01crrider@gmail.com

This forum thread has 2 replies