RussB

S200x600_1_1450103961

Lives in: GBR

Member since: 07/12/14

Recent Activity Filter:

Added reply in a thread Continued Acceleration While off the Throttle 12/11/2017 1:46 AM

As above, check for air leaks and give the throttle and carb and thorough strip down and clean. Also ensure you are running enough slack in the throttle cable. Also check your pilot jet, I've found a lean pilot can make the bike hang in the revs a little. ... more »

Added reply in a thread Brake combos 12/11/2017 12:25 AM

As above, a CRF master cylinder alone is a great mod. But I'm also currently using a CRF front caliper as well and really like it. However I think a lot of the added power and bite is down to the stock Nissin pads I'm running. They are better than any ... more »

Added reply in a thread 3 Things that need to stop on VitalMX Forums 12/8/2017 4:00 AM

9. Non Bike Build threads in the Bike Builds section.

Added reply in a thread MC's 1997 Suzuki (the forks rumour) 12/7/2017 7:25 AM

Lucky for us quite a lot of the late 90's races are on Youtube. Not the same as watching it live on the night though, I bet it was awesome. Loving this thread, I had no idea he used forks from a CR!

Added reply in a thread Suzuki RH / RA factory skidplate And waterpump protection 12/7/2017 3:22 AM

I've sent another! Bloody Vital message system

Email me at rusboyles@googlemail.com

Added reply in a thread How unstable are RM250's? 12/6/2017 11:58 PM

Been riding RM250's since 2010. I think the headshake thing is over exaggerated. Don't get me wrong I've got head shake on the RM several times, but never any worse than on any other bike I've rode. I think the difference is that with Suzuki's you need ... more »

Added reply in a thread YZ250 Swingarm Update the Right Way (Not the MXA way) 12/6/2017 1:21 AM

Great info and awesome write up. Nice job on the machine work too!

Added reply in a thread Turbojez's RM 250 project 12/5/2017 8:33 AM

Nice work! Some great pieces on this bike. Love the solid rear rotor. Graphics scheme looks great too. Where did you get the factory front plate from? May I ask how much it cost?

Added reply in a thread Bike setup question 12/5/2017 8:28 AM

More preload will raise the forks in their stroke, so this could be a good start if you feel they are sunk too low in the travel. 4 clicks out is quite stiff. so if your forks are low in the travel this could make them feel harsh. The combination of ... more »

Added reply in a thread Removing the back fire screen 12/4/2017 5:12 AM

Said to improve air flow, saves a little weight too. I used an RM250 cage in my RMZ450 (identical cage just without the screen) Didn't notice much difference, but no harm in giving it a go.

Added reply in a thread Suzuki RH / RA factory skidplate And waterpump protection 12/3/2017 8:44 AM

PM sent

Added reply in a thread Suzuki RH / RA factory skidplate And waterpump protection 12/2/2017 6:07 AM

Would you be willing to sell the water pump piece separate? I already have a carbon lightspeed sump guard cheers

Added reply in a thread Help Identify My Master Cylinder (CR/CRF) 11/30/2017 11:50 PM

Thanks for the help guys!

Started new thread Help Identify My Master Cylinder (CR/CRF) 11/30/2017 1:03 PM

So I purchased this front brake. I'm pretty sure its a Honda MC but have no idea of the model or year bike it came off. I purchased a Renthal Intellilever (LV-113) and bought one for a Honda CRF250/CRF450 07-17 thinking that should do it but it's not

... more »

This forum thread has 5 replies

Added reply in a thread Titanium rotors 11/30/2017 12:30 AM

Post up pics when you get them!

Added reply in a thread 2001 CR250 $pecial Restoration Part II - RC250 Factory Replica or Tribute bike 11/28/2017 2:57 AM

Loving this! Some lovely pieces on this bike. Even though the hubs aren't HRC, they are gorgeous! I wouldn't be upset with having them fitted to one of my bikes

Added a comment to Daca31's bike check 11/17/2017 3:17 AM
S780_botd170

Awesome job. So clean!
Great photography too

0 0 0

This setup has 3 comments.

Liked a bike check Rhonda From Downunda 11/17/2017 3:16 AM
S780_botd170
Added reply in a thread showa A kit certified guy? 11/16/2017 9:31 AM

RMZ fork and RMZ clamp, with RMZ front wheel and axle etc. I've bored out stock RM clamps in the past to fit RMZ forks. But want to use RMZ clamps this time so interested to see how others have done it.

Added reply in a thread showa A kit certified guy? 11/16/2017 12:49 AM

How did you go about mounting the RMZ clamps? Did you use an RM steering stem? What have you done for steering stops? I'll be doing the same mod to my RM this winter so any info would be great!