mxBryan

S200x600_img_2348_1461571554

Lives in: BEL

Member since: 11/03/13

Recent Activity Filter:

Added reply in a thread Fmf gnarly pipe same performance as fatty? 3/22/2014 1:26 PM

For what i know the Gnarly pipe gives you more bottom end power.. You can also compare both exhausts on the website of FMF. I run the fatty pipe on my 00 CR250 !

Added reply in a thread CR 250 01 clean up FINISHED 3/20/2014 11:03 AM

@keeptwostrokesalive Do you use the truck to transport your bike ? and does it fit the truck ? I can't try it out because the truck is at the garage right know, I'm having a hard time finding parts over here.. Need 2 simple lower ball joints.. Had to

... more »

Added bike check CR250 Carmichael MXoN Replica 2001 3/20/2014 1:40 AM
S780_img_1217
Added reply in a thread 2001 Factory Honda RC250M 3/19/2014 1:33 PM

How is your project doing ? any updates..? I saw on ebay a Stefan Everts HRC cylinder up for auction, which i think is yours ??

Added reply in a thread CR 250 01 clean up FINISHED 3/17/2014 4:07 PM

Yesterday (Sunday) unfortunately my engine broke.. When i came home i immediately stripped her down again. The piston and cylinder head were full of shattered pieces. Cause of this was a piece from the bottom bearing of the connecting rod that broke

... more »

Added reply in a thread CR 250 01 clean up FINISHED 3/17/2014 10:20 AM

Yes indeed it has a T on it. Thank you.

Added reply in a thread CR 250 01 clean up FINISHED 3/9/2014 10:47 AM

... more »

Added reply in a thread CR 250 01 clean up FINISHED 3/3/2014 1:23 PM

She is finished ! Only need a new throttle tube because the one i ordered from chaparral didn't fit.. The dunlop decals are not in the same position, It's a needle in the eye ! but i don't have a spare one so i'll have to leave it like that.

... more »

Added reply in a thread CR 250 01 clean up FINISHED 2/22/2014 11:55 AM

We're almost ready ! Got my number plates back.

Also got my 2 seats covered, credits to my friend, he did a awesome job ! One with a one industries cover. And the other one is the replica of carmichael from throttle jockey. ... more »

Added reply in a thread RM 250 Build finished 2/15/2014 2:39 PM

On the first picture at the clutch cover is that a oil leak i see ??

Added reply in a thread I think I'm gonna be sick... 2/12/2014 8:01 PM

I didn't feel comfortable watching this ! No parachutes or nothing..

Added reply in a thread KX500AF Build - Finished! 2/12/2014 7:11 PM

Awesome bike ! Nice job.

Added reply in a thread CR 250 01 clean up FINISHED 2/7/2014 5:42 PM

Some small updates again. Monday i received my "new" old seat, it had a new cover on it.

I bought this one because i didn't want to put the RC gripper seat cover on the old seat. My old seat always had the OEM seat cover underneath all other ... more »

Added reply in a thread CR 250 01 clean up FINISHED 2/7/2014 11:23 AM

Thank you ! There is no link to the graphics because it's not on their website. I called TJ and asked if they still produced the 00-01 woody graphics or the MXoN version. and they did. Give them a call, I'm sure they will print you a set.

Added a comment to 107's bike check 1/27/2014 3:21 PM
S780_img_3631

Nice bike ! Love the color of the HGS silencer..

0 0 0

This setup has 13 comments.

Added reply in a thread CR 250 01 clean up FINISHED 1/26/2014 5:57 AM

Does someone know where they still sell OEM carburator vent hoses ? I can't find these anywhere anymore, even not on ebay ?! Anyone ?

Added reply in a thread CR 250 01 clean up FINISHED 1/25/2014 2:59 AM

It has already etched a bit from the previous owner, I Always put some 1mm thick tape on some spaces. The bolt that attaches the shroud to the frame right there you can see a little bit tape, Also on the subframe you can see some.

Added reply in a thread CR 250 01 clean up FINISHED 1/24/2014 10:07 AM

Allright some updates from today ! This morning i received a small package with some OEM parts i ordered.

I lost this clamp a couple of months ago so i had to order new ones. The old shaft bolt, rubber seals and the other ... more »

Added reply in a thread CR 250 01 clean up FINISHED 1/22/2014 5:10 AM

My OEM rads still work great but they are indeed a little dented and the right radiotor isn't straight anymore so i can't mount the radiator guards properly. I've been to the local radiator repair guy who repairs car and motorcycle rads for years now,

... more »

Added reply in a thread CR 250 01 clean up FINISHED 1/22/2014 2:40 AM

When i bought the bike 2 years ago they told me it was a 2001 ? But i didn't know the 2001's had mikuni carbs, So i think you could be right that it's a 2000 ! I even didn't knew there was a diffrence between 00 and 01 so thanks for the info.. This is ... more »