1 of 6
Related:
Create New Tag
C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/11/2016 4:23 PM

Hey legends this will be my bike build! I just picked up a 2005 Cr 250 here in Aus for a pretty reasonable price. I bought the bike to tear down and clean up to ride. Looks like it hasnt been cleaned properly in years but nothing that I can't renew. Bloke I bought it off isn't the original owner but only rode it a handful of times before blowing his knee out. What's everyone's thoughts / theory's on working out estimated hours? Bike is basically completely stock other then a few random bolts and shitty Chinese radiator on one side. Things that I personally look for are obvious wearing on the clutch / ignition covers, shock body ect.. And on this particular bike the wear on the "Honda" logo on the seat
Here are some photos please let me know what you think















Follow me on Instagram "elliottmagnus"

C50_1461538625417_1461540477 Kx125rider Quote
9/11/2016 6:50 PM

First thing i would do is give that thing a good power washing



C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/11/2016 11:25 PM
Kx125rider wrote:

First thing i would do is ...more

unfortunately this photo was taken right after degrease / pressure wash I've got a lot of cleaning to do

Follow me on Instagram "elliottmagnus"

C50_cr3a3462_1424013006 arvid Quote
9/12/2016 1:41 AM

i'm guessing 50 hours

C50_images_1390697951 r.sal923 Quote
9/12/2016 2:17 PM

I always gets me when people sell dirty things(cars,trucks,bikes,quads) if you take the time and clean it up you can usually get more money. Or a the least a quick sale. That bike is a 50-60 hr bike by the looks of the boot marks on cases

C50_bliss_1486915553 nascarnate326 Quote
9/12/2016 6:20 PM

Soda blaster would make that thing look so much better.

C50_ryan_villopoto_interview_2_1505140926 imoto34 Quote
9/12/2016 6:40 PM


I find it hard to guesstamate based off wear marks on the body. Me personally, I ride with my legs and I will mark up a bike quick. I know a kid that is a fast rider and just moved off a mini to 150 that rags out his plastics/graphics super fast. He is all over the bike being little and it just shocks me each time what his bike will look like after a long day at the practice track burning long motos.

Usually but not always, the quicker the rider the quicker the bike will start looking ratty.

Congrats on the new bike, I love my 06!
C50_139826380_1291095094 CamP Quote
9/12/2016 8:18 PM

Looks like it was left outside near the beach. My guess is 50-100 hours.

Find someone that does vapor blasting if you want to make it look good again.

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/12/2016 8:50 PM
imoto34 wrote:

I find it hard to ...more

Yeah thanks mate sort of feedback I'm chasing

Follow me on Instagram "elliottmagnus"

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/12/2016 8:52 PM
nascarnate326 wrote:

Soda blaster would make ...more

Yeah I plan on it mate I do a little macgyver soda blasting in my back yard
I might even post some photos of when I'm done cheers

Follow me on Instagram "elliottmagnus"

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/12/2016 8:54 PM
r.sal923 wrote:

I always gets me when ...more

Yeah it's pretty disappointing really
But I guess for us it's great to find cheap dungas put a little work in and reap the rewards!

Follow me on Instagram "elliottmagnus"

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/12/2016 8:55 PM
CamP wrote:

Looks like it was left ...more

Vapour blasting is the shit
Unfortunatly their isn't anyone local around my area who does it

Follow me on Instagram "elliottmagnus"

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/15/2016 8:29 PM

Might just turn this into a little build thread I was going to to post a few photos of when I'd finished but thought it might be fun to post photos and comments along the way.

Tore the big girl apart in a few hours no real trouble or anything out of the ordinary other then the steering stem nut being finger tight.



The plan is just a simple clean up with a few bolt on mods and replacing fucked bolts ect.

Motor is in pretty ruff shape



Frame also pretty ruff, no damage just filthy. I had done a little diy soda blasting before so had a crack at the frame with this dodgy set up in the yard haha.









Come up pretty good just wanted to attack the hard to get areas with the soda blasting, still a long way to go. I'm not a big fan of the polished mirror look, try get it looking like it did when she rolled out the factory.





I also have a little bead blasting cabinet in the shed. Here are the motor hangers pretty stoked on these just blasted them and a quick scotch bright





That's it for now anyways till I come home from work. Hope you enjoy and come along for the journey yeeew.

Follow me on Instagram "elliottmagnus"

C50_ryan_villopoto_interview_2_1505140926 imoto34 Quote
9/16/2016 12:33 PM

That looks like a different frame, nice!

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/16/2016 9:33 PM
imoto34 wrote:

That looks like a ...more

Thanks mate

Follow me on Instagram "elliottmagnus"

C50_image_1489808402 stevo450 Quote
9/17/2016 8:50 AM

Looks good mate!! If you fancy some real good finishing on the aluminium stuff you should look at Aqua blast!

What plans do you have for the bike?

If it ain't broke-learn how to fix it anyways!

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/17/2016 12:20 PM

Yeah mate I was under the impression that their wasn't anyone around Mackay that does it
Apparently their is so I might get a quote to get some stuff done carb, hubs, calipers ect.
Yeah man just bolt on mods exhaust some new reeds ect. Will most likely send the suspension away as well. Motor is pretty sound just been rebuilt so I'll leave it for now. All depends on the coin I'm willing to dump into her as well haha.

Follow me on Instagram "elliottmagnus"

C50_img_20160913_011812_1473755696 mr765 Quote
9/20/2016 10:37 AM

Look at the sight window on the rear brake master. If it's ridden a lot it will be rough and hard to see through, if it's still clean and clear chances are it's a low hour bike. Case covers and plastic are an easy change but everyone forgets about that little sight window

C50_image_1476968065 Spuder155 Quote
9/20/2016 4:24 PM

What's your soda blasting setup? Interested to do some myself.

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/20/2016 5:31 PM
Spuder155 wrote:

What's your soda blasting ...more

Hey mate it's pretty basic I just use a gun similar to this



Got it for about $20 from the local auto store, tryed to bulk buy some baking soda but couldn't find any so I used 6 packets from the grocery store gave me like 3kgs of soda for like $10. I used a tent in the back yard so once I run out of my bucket I could sweep back up and reuse. Regulate the pressure to about 90-100 psi, my compressor is pretty old so i can blast for about 2-3 mins before I need to let it pressurize again. Works fantastic just a long and slow process! Hope that helps

Follow me on Instagram "elliottmagnus"

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/20/2016 5:38 PM
mr765 wrote:

Look at the sight window ...more

Hey cheers mate yeah just had a look it's pretty clear.
After stripping the bike i can sorta tell she has pretty low hours now thanks

Follow me on Instagram "elliottmagnus"

C50_image_1489808402 stevo450 Quote
9/20/2016 9:11 PM
Spuder155 wrote:

What's your soda blasting ...more

elliottmagnus wrote:

Hey mate it's pretty basic ...more

That works really well considering it's a 'back yard' budget rig!
I bet even a cheap as tent/gun/soda would be fairly reasonable.... I like the tent idea to contain the dust...smart idea!

Do you literally sit in the tent and blast away?

If it ain't broke-learn how to fix it anyways!

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/20/2016 10:02 PM
stevo450 wrote:

That works really well ...more

Yeah mate worked really well. Soda is by far the best media to use in my opinion and yeah pretty much just tucked myself away in the tent for a while haha. I set up an industrial fan out side to help with ventilation because as you could imagine the tent got pretty dusty.

Follow me on Instagram "elliottmagnus"

C50_image_1476968065 Spuder155 Quote
9/21/2016 12:25 AM
Spuder155 wrote:

What's your soda blasting ...more

elliottmagnus wrote:

Hey mate it's pretty basic ...more

Yeah cheers man

C50_image_1476968065 Spuder155 Quote
9/21/2016 5:45 AM
Spuder155 wrote:

What's your soda blasting ...more

elliottmagnus wrote:

Hey mate it's pretty basic ...more

Spuder155 wrote:

Yeah cheers man

What auto shop was it mate?

C50_323107_2275237130900_6435553_o elliottmagnus Quote
9/21/2016 3:17 PM
Spuder155 wrote:

What auto shop was it ...more

I got mine on sale at super cheap works pretty good for an el cheapo

Follow me on Instagram "elliottmagnus"

C50_323107_2275237130900_6435553_o elliottmagnus Quote
10/13/2016 3:04 PM

Hey legends been a little while, still cleaning away
Got the calipers/brake components all cleaned up pretty stoked on them they where in bad shape









I've gathered majority of the hardware in preparation for zinc coating
Anyone with experience know the best prep before sending them away?
I had a chat to old mate on the phone who said they degrease and clean them obviously before the process starts but wondering if wire brushing or blasting the pieces before getting the coating would be the go?





Parts parts parts, guess you could say I'm on a budget but more then anything I'm bit of a tight arse so parts will be ordered few and far between but on the list so far to get things rolling

Swing arm / linkage bearing
Front / rear wheel bearings
Black tusk spokes wrapped with black excel rims
Mika metals bars and sprockets ect
New pc full system
New brake lines through out
Probably change my mind million times by the end so bare with me haha

Finished the frame and swing arm up anyways pretty happy with it
Soda blasted the hard to get areas and used a soft carbon wire wheel to help speed up the process







Hopefully get stuck into the motor next days off it's gonna be a mission





Cheers

Follow me on Instagram "elliottmagnus"

C50_image_1489808402 stevo450 Quote
10/14/2016 4:04 PM

I like the finish on the frame!

As for the zinc, I just get rid of the majority of the grease ( usually I just wipe the excess grease off ) and send the hardware out for plating. If any surfaces are pitted/visually dulled then then the plating will highlight these areas.
For the best visiual results I suggest polishing the high visual parts before sending out....

If it ain't broke-learn how to fix it anyways!

C50_323107_2275237130900_6435553_o elliottmagnus Quote
10/14/2016 5:26 PM
stevo450 wrote:

I like the finish on the ...more

Thanks man
Yeah mate think I'm going to wire wheel some of the larger stuff before sending it away.. I'm really excited to see the finnished product hopefully within the next month should have my shit sorted
I'm keen to see your suspension once it's rebuilt gonna look killer!

Follow me on Instagram "elliottmagnus"

C50_image_1489808402 stevo450 Quote
10/14/2016 6:37 PM
stevo450 wrote:

I like the finish on the ...more

elliottmagnus wrote:

Thanks man
Yeah mate think ...more

Sounds good! Wire wheel is a good idea... You'll like the results but make sure the mob that does the plating wire-hang each component.
Sometimes they use a 'bucket' and the results are as good...

I'm keen to see my suspension finished up too! All the parts are on their way from JP now!

If it ain't broke-learn how to fix it anyways!

1 of 6

Post a Reply

Cool Wink Smile Tongue Laughing Shocked Sick Angry Blink Sad Unsure Kissing Woohoo Grinning Silly Pinch Sideways Whistling Evil Dizzy Blush Cheerful Huh Dry