Cadpro18

Lives in: Crystal Lake, IL USA

Member since: 10/17/13

Recent Activity Filter:

Added reply in a thread ISO - Toy Hauler 8/13/2019 3:34 PM

I've got a 2008 Keystone Raptor 3814 SS that I'll sell. It's got a 14' garage. I haven't used it in three years. Prior to that it sat on a permenant site at Motosports

Added reply in a thread NEW & Used SDI 2016-2017 KTM Husqvarna 250 350 450 SXF Machined Linkage Link Rocker 7/3/2019 6:01 PM

PM sent

Added reply in a thread Anyone try fitting YZ SSS forks to a KTM 450sxf? 7/1/2019 5:10 AM

Corey @ Pro Tune, that price was 4 years ago. The price was for like-new cartridges. When I moved the cartridges to the next bike with 4CS I chose to buy AER lugs.

Added reply in a thread Factory Bikes, Titanium Cranks and Camshafts? 6/25/2019 10:36 AM

Sprint Cars had started to go to Ti cranks and were quickly outlawed. I don’t think Ti rods are legal either. Probably the least regulated series in racing (circle track anyway) is Dirt Late Model and Ti rods are common.

Added reply in a thread Sag and correct spring rate 6/22/2019 8:12 PM

I ran a 45 N/mm (4.6 kg/mm) spring on my 350 @ 105 sag and 40 free sag. I weigh 155 lbs. I think I had 7 mm preload on the spring.

Added reply in a thread Show Us Your Factory Replica Build!!!! 6/16/2019 4:46 AM

Inspired by- yes, replica- no.

Added reply in a thread Kx 250 shock options 6/3/2019 9:13 AM

No, not without extensive mods... I’ve done it.

Added reply in a thread Upgrade footpads for a 96' KX125???? 4/24/2019 10:55 AM

The 2000 is different.

Added reply in a thread EBAY killer deal 4/17/2019 7:26 PM

I cheaped out and bought 2 pair of the $15.99 ones. I got this email from eBay shortly after.

Seller says they shipped.

Added reply in a thread Anyone had there 17 + KTM 2stk do this? 4/6/2019 3:46 PM

Here is mine at 1 hr from new.

... more »

Added reply in a thread Anyone had there 17 + KTM 2stk do this? 4/3/2019 12:00 PM

KTM owned it when it was originally honed...

Added reply in a thread Anyone had there 17 + KTM 2stk do this? 4/3/2019 11:41 AM

Yes, my ‘18 250 SX had that at 1 hr. Found it when testing pipes and heads on the dyno. Couldn’t feel it, but we honed it and installed new rings. It didn’t affect dyno numbers.

Added reply in a thread What all footpegs work on kx 250 4/2/2019 4:31 PM

'15 KTM pegs on my '99... Sano

Added reply in a thread Rear break dragging 3/27/2019 9:08 AM

Jean-Michel Bayle would drag the rear brake out of turns... won SX, 250, & 500 championships in 1 year I believe.

Added reply in a thread "I want some new rims" 3/8/2019 11:22 AM

Technically, 3-piece wheel components are the center, inner barrel, and outer barrel (outer lip).

Added reply in a thread Ricky Carmichael Chevy Truck KX250 2/13/2019 8:47 AM

Thanks. I got lucky finding the pipe. A guy guy in Louisiana had some old inventory from when he owned a Kawasaki dealership.

Added reply in a thread Ricky Carmichael Chevy Truck KX250 2/13/2019 8:39 AM

DecalMX

Added reply in a thread Ricky Carmichael Chevy Truck KX250 2/12/2019 3:53 PM

Good looking build. I did an RC themed build last year. The '99 was the last 2 stroke I raced and my favorite.

Build thread: https://www.vitalmx.com/forums/Bike-Builds,46/1999-KX-250,1337598

Added reply in a thread Dynojet Power Commander and Autotune 2/5/2019 5:03 PM

The Autotune doesn't need to be enabled (or installed) at all times. It trims the base map and creates a trim table. You can then apply the table to the base map and load that corrected map to the Power Commander as the new base map. Each time you run ... more »

Added reply in a thread Project bikes: how much is too much? 1/29/2019 11:39 AM

Started out getting the bike for free and ended up with over $10K in parts and about 250-300 hrs in labor over 4 months. It turned out too nice to ride so I had to get a 250SX. Some things don’t turn out as planned...