Lives in: Ithaca, NY USA

Member since: 03/29/16

Recent Activity Filter:

Added reply in a thread Let's see/review those 2019 kx450s 6/29/2020 11:23 AM

Same here. About 115 all moto. Did top end at 100. Only problems I've had to date are bending the rear chain guide, cracked muffler mount, and that single bearing chain roller got pretty sloppy so I replaced it early. Bike has been fantastic!

Added reply in a thread Upstate New York riding? 6/26/2020 8:22 PM

Ton of riding in NY. I'm in Ithaca and there's something like 20 tracks within 2.5 hrs. Upstate Motocross, Empire State MX, CNYMRA, D34 (kinda), and M.S.C are the districts in the area. I have a list of tracks I can post on Monday, but the closet tracks ... more »

Added reply in a thread Let's see/review those 2019 kx450s 6/24/2020 8:43 AM

It doesn't matter which coupler you're using. If you flash any of them to all 0's it will behave like the green one. If you plug in the black or white and read the fuel/ign tables you'll see the offset values for those couplers and the associated "Map ... more »

Added reply in a thread Good quality/budget option rather than Fox 180/360 6/18/2020 8:08 AM

Big fan of FXR helium gear. I've owned Fly Hydrogen, Fox 360, and Thor Prime over the past few years. The FXR and Fly gear is the best balance of durability and performance for me.

Added reply in a thread Seat bounce 6/13/2020 7:22 AM

My shock is a pogo stick and I loosened my throttle tube and rotating it forward to prevent my elbow from dropping when I twist it.

Added reply in a thread Motocross physically demanding/training video ? 6/13/2020 7:19 AM

There used to be a crazy Heath Voss training video from back in the day. I can't remember if it was on RacerXVT or Transworld? I remember him doing some gnarly peg-board work.

Added reply in a thread Fixing a dent - FMF Titanium Header 5/30/2020 8:29 PM

I did my ti header by pressurising the header with about 20 psi and heated the area with an oxyacetylene torch. Go slow and be careful you don't blow a hole in it. Work from the perimeter of the dent and slowly move in as the dent "rolls" out.

Added reply in a thread Let's see/review those 2019 kx450s 5/25/2020 6:37 PM

Are you using the right seat bolt? The OEM one has a shoulder in it so it isn't clamping on the number plate. A normal M8 is just going to loosen up. I have over 100 hrs on mine and don't recall losing one yet

Added reply in a thread 100 percent Armega Goggle 5/22/2020 3:05 AM

I've been using the Armega since it launched last year and have been loving them. I thought the hiper lenses would be a gimmick, as I've always been a "clear lens guy", but holy crap do those lenses let you see details in the track! I personally haven't ... more »

Added reply in a thread What 2018+ bike turns and corners as well as the 06 RM250? 5/18/2020 8:58 AM

I had an 06 RM250 and I don't think it handled particularly great honestly. The engine was the best 250 smoker engine I've ridden though!

Added reply in a thread false advertising for engine oils 5/13/2020 8:45 AM

Oh yeah the gauge is pegged on this one, boys!

Started new thread Wrap-Up vs Real Talk 5/7/2020 7:57 PM

This forum thread has 6 replies

Added reply in a thread Gravity Fed Simpson Pressure Washer 4/17/2020 7:09 AM

Install lift kit in your truck = increased supply pressure from the barrel being higher up! Now I get why all the motobros do it


Added reply in a thread Staple size for seat cover install 4/13/2020 11:28 AM

Exact same one I use and it works great. I picked mine up at Home Depot. I typically use 3/16" staples. Before that I used a manual stapler which worked, but didn't have the long nose that the pneumatic has, so it didn't do a good job of driving the ... more »

Added reply in a thread Anyone got sponsorships here? 4/13/2020 9:30 AM

COVID just sent me $1200 to put towards a sick pipe

Added reply in a thread ISO 19-20 kx450 wheel set 4/6/2020 7:46 AM

I can get a good deal on Tusk wheels if you want to PM me.

Added reply in a thread Let's see/review those 2019 kx450s 4/5/2020 5:59 PM

I was going to just put the OEM one back in but got a good deal on a JE piston. I went with the 13.5:1 CR and while I only have ridden it twice, I really like it. I did it at the same time as an FMF pipe, so it's hard to tell what benefit came from which ... more »

Added reply in a thread Let's see/review those 2019 kx450s 4/5/2020 2:39 PM

Lay the bike on it's side (clutch side down), loosely put the rear bolts in, then you can hold the center bolt bar with one hand next to the ignition cover. Way easier that way. Or cut a hole like this one haha

Added reply in a thread Let's see/review those 2019 kx450s 4/5/2020 1:39 PM

Well quarantine has me going a little stir crazy, so I decided to make a needed improvement to my acerbis skid plate... One trip to harbor freight for some coarse Dremel rasp bits later... I took my old OEM skid plate and traced the drain bolt cutout

... more »

Added reply in a thread Gear Bag Organization 4/3/2020 6:25 AM

OK that's pretty awesome!