Nolan_Stromberg

S200x600_dsc_9913_2160x3252_1478575572

Lives in: Minot, ND USA

Member since: 03/02/16

Recent Activity Filter:

Added reply in a thread Cleaning up my Works Pipe 1/17/2018 4:52 AM

I thought about the reheating on the seems, if I don't like how this looks, that will be next

Added reply in a thread CR125 VS CR134 1/16/2018 4:01 PM

I would personally keep it a 125. I wasn't impressed with my 134. It seemed unreliable and you can't rev it out like a 125. But if you don't rev it out or ride it super hard, it might be okay, the low end will be much better than a 125. But as far as ... more »

Added reply in a thread Cleaning up my Works Pipe 1/16/2018 2:49 PM

Thank you Sure is a Clarke tank. The gas cap failed in under 4 hours of operation but I think it might have something to do with the U4.4. That shit seems to eat everything. The fitment was okay. I would recommend their pad kit. All in all I would buy ... more »

Started new thread Cleaning up my Works Pipe 1/16/2018 1:37 PM

Just redid my works pipe. I will add "post heat" photos after this weekend. Step one - white metal blast Step two - scotch brite and oil Step three - install and final wipe down

... more »

This forum thread has 9 replies

Started new thread In search of Yamaha super Moto wheel set 5/17/2017 11:52 AM

In search of super Moto wheel set for my yz. New or used, with or without tires, sprocket, brakes etc. Message, call or text 701-240-1752

This forum thread has 1 reply

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 2/13/2017 10:18 AM

Thanks everyone! I really appreciate all of the response. Here is a picture from the race this weekend.

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 2/9/2017 4:44 PM

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 2/9/2017 4:41 PM

... more »

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 2/9/2017 4:39 PM

I couldn't wait any longer to post pictures. 2017 Cobra CX50 FFWE (Finish First Works Edition)

... more »

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 2/8/2017 7:27 PM

It's very hard, abrasive and chemical resistant although it will scratch with course abrasive wearing. It's super thin, super light and has limited gloss availability. It's tougher to apply and cures for much longer. All in all, I'm beginning to get ... more »

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 2/7/2017 6:49 PM

Bled the brakes. Ugh, what a good time. Psych... Formula needs a new bleed system for their brakes. Also got rid of the yellow hoses for blue, and installed the hour meter. Almost ready for this weekend indoor race and reveal

... more »

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 2/7/2017 6:44 PM

Sorry, I should have specified, this is not my son's bike. I'm only 24 and don't have any kids yet. It's actually for a friend of mine Tony. His boy is coming up through the 50 ranks. But thanks for the kind words guys!

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 2/5/2017 6:55 AM

Clutch cover and kick start installed

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 2/4/2017 1:19 PM

Got everything coated. Should be fully assembled this evening. Good day to supercross and grill, and work on bikes. Radiator and carb bowl coated.

... more »

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 1/30/2017 8:49 AM

Haha thanks man I would highly recommend a professional cerakote applicator if you go that route. I've redone a lot of self applied cerakote due to adhesion problems. If you check out my "2015 YZ 125 dream race" build thread, I coated the upper fork

... more »

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 1/29/2017 1:07 PM

Sunday Funday

... more »

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 1/29/2017 9:29 AM

... more »

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 1/29/2017 9:18 AM

Finished the tire lettering and graphics today

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 1/28/2017 5:31 PM

Thanks! This is my first full Cerakote job on a bike. I'm a huge fan. I do a lot of gun parts, misc dirtbike parts and high temp exhaust parts, but I figured I'd do a full Cerakote job on this one.

Added reply in a thread *Finished* 2017 King Cobra CX50 Factory Works Edition 1/28/2017 2:04 PM

I live for this feeling. There is nothing like seeing what you had in your head, come together and look this great.

... more »