YZed250

YZed250

Lives in: Costa Mesa, CA USA

Member since: 11/09/14

Recent Activity Filter:

Added reply in a thread Yamaha YZ 250 or KTM 250 SX? 10/19/2020 12:37 PM

You get what you pay for, especially when buying new! I'd stay open and get whatever presents as best value/lowest hours if you end up getting something low hour. They are both great bikes, but the KTM is better, IMHO. Lighter, better ergos, clutch, ... more »

Added reply in a thread CTI Ossur Knee Braces XXL Right and Left 10/16/2020 2:06 PM

... more »

Added reply in a thread CTI Ossur Knee Braces XXL Right and Left 10/16/2020 2:03 PM

... more »

Started new thread CTI Ossur Knee Braces XXL Right and Left 10/16/2020 2:00 PM

This is a set of XXL knee braces by CTI (Ossur OTS model). They are very low hour/excellent condition with good hinges, velcro and minimal wear except that there is a little bit of cracking in the epoxy frame coating on the left brace. This is surficial/sun ... more »

This forum thread has 3 replies

Added reply in a thread Mothballing a PW50 10/16/2020 11:43 AM

I don't think it will need much. Best to work on popping out grandkids sooner than planning for when the PW will be used again, lol. Just run the carb and tank dry and expect to do a few TINY things once you go to restart it like possibly replace the ... more »

Added reply in a thread 2021 KTM 250SXF 350SXF FMF Titanium Header 10/16/2020 8:37 AM

... more »

Started new thread KTM Husqvarna Frame Touch-up Paint? 10/15/2020 12:18 PM

Anyone have a recommendation for a touch-up paint that is compatible with a 2017 Husqvarna (white)? I believe this might be a powder coated frame. I'm looking to touch up frame wear in the boot area prior to re-installing frame guards. I also have some ... more »

This forum thread has 2 replies

Added reply in a thread WTB pre owned Premium helmet 10/13/2020 10:29 AM

Amazing value in this space right now. Buy new as long as you can afford.

Added reply in a thread Bye bye geico honda 10/13/2020 10:02 AM

Change or die.

Added reply in a thread Restoring metal 10/13/2020 7:40 AM

Check out Cameron Niemela on youtube. https://youtu.be/lUpGdbff1MU

Started new thread 2021 KTM 250SXF 350SXF FMF Titanium Header 10/12/2020 10:05 AM

Dyno time only on this 2019 2020 and 2021 FMF titanium header for KTM (and possibly Husqvarna) 250 SXF 350SXF. Asking $385 shipped within USA. Pics on request, thanks

This forum thread has 2 replies

Started new thread Delete 10/12/2020 8:47 AM

Dyno time only on this 2019 2020 and 2021 FMF titanium header for KTM (and possibly Husqvarna) 250 SXF 350SXF. Asking $385 shipped within USA. Pics on request, thanks

This forum thread has 2 replies

Started new thread Wanted Magura Clutch Master Cylinder or Brembo Clutch 10/9/2020 10:44 AM

Looking for a replacement magura master cylinder for my 2017 Husqvarna or Brembo clutch perch, lever, line and slave from a recent model KTM. Please let me know what you got. Thanks,

This forum thread has 3 replies

Added reply in a thread 2008 KTM Seat- $30 shipped 10/8/2020 3:34 PM

Great deal, fast shipping, great seller, thank you!

Added reply in a thread 2019 ISDE 350 Refresh 10/8/2020 2:05 PM

Did you notice any issues with the motor at 100 hours? Any loss of power or oil or problems?

Added reply in a thread Hole in ktm 300 cylinder 10/8/2020 1:57 PM

If it has a Mikuni carburetor, those have a tendency to leak and can cause a lean bog.

Added reply in a thread front rotor maintenance 10/6/2020 12:03 PM

I clean the front pads by rubbing them face down on concrete with hot water and degreaser or dawn. It's not as good as new pads, but cleans them up to 90%. Pads are porous so there will be some oil that's embedded. Heat, sand, and alcohol will also help ... more »

Added reply in a thread KTM overheated - what do I need to consider? 10/2/2020 9:24 AM

Which battery do you use? From what I heard, running a fan can flatten the battery, so I guess its a balance between the stator output, battery capacity and fan set point. I know that the current gen of SXF XCF FC FX bikes have low stator output.