YZed250

YZed250

Lives in: Costa Mesa, CA USA

Member since: 11/09/14

Recent Activity Filter:

New thread Yoshimura RS9 Dual Exhaust system CRF250R 2018 to 2020 9/14/2020 11:15 AM

I have a set of aluminum dual exhausts and stainless header for a 2019 CRF250R for sale. This is the aluminum/stainless RS9 full system that retails for $900+. I understand that these will fit CRF250R from 2018 to 2020. These may also fit the RX and ... more »

This forum thread has 0 replies.

New thread Vortex ECU X10 9/14/2020 10:59 AM

I have a used Vortex ECU for sale with 35 hours on it. It is currently programmed for a 2019 CRF250R by XPR Motorsports but can be programmed for all the current bikes except the YZ250F YZ450F. My understanding is that it will be plug and play for CRF250s ... more »

This forum thread has 0 replies.

New thread WTB WP AER Lugs and Hydraulic Locks for SSS 8/27/2020 1:59 PM

I'm about to install some KYB cartridges in my WP forks and part of that process is modifying the WP lug. If anyone has a set of rebound adjusters, lugs or hydraulic locks/bottoming cones that are suitable and they would like to sell, please let me know. ... more »

This forum thread has 3 replies.

New thread Husky Airbox Lid Holes? 8/25/2020 2:10 PM

I ride west coast offroad in some pretty long/dusty events and wondered if it's worthwhile drilling the cover on my stock FC250. I don't have a spare cover for now, but might end up with one (one closed and one drilled cover). For those that have drilled ... more »

This forum thread has 7 replies.

New thread Fork and Shock Shipping CT >> CA $? 8/13/2020 8:00 AM

Moving a set of Yamaha WR suspension from CT to CA, can a vitard please give me a rough shipping cost so that I can make a fair offer that covers shipping. How about $65?

This forum thread has 9 replies.

New thread Wanted KTM 250SXF FC250 parts 8/4/2020 2:33 PM

Thought I would check here before I ordered this stuff through my local KTM shop: Searching for a few parts for my new (to me) 2017 FC250. This is a basic/budget restoration: - fork pump - bar pad - fork guards - frame guards - mx hand guards - shift ... more »

This forum thread has 3 replies.

New thread FC250 Husky Wiring and E-start problem 7/21/2020 8:54 AM

Can someone post the colors for hookup of the e-start button on a 2017 FC250? I just picked up this bike used and the e-start button has been ripped/disconnected. I have two torn wires on the button side and two on the bike side and I tried twisting ... more »

This forum thread has 13 replies.

New thread KTM Husky 250F Crank Wear 7/15/2020 12:38 PM

Picking up a used 2017 FC250 with unknown hours (likely 100+). I fully anticipate framing the bike, and at least replacing the piston, rings, cam chain, and tensioner. It will most likely get a new oil pump gear, while I have motor out. With regard to ... more »

This forum thread has 11 replies.

New thread KTM Husky Part Number Lookup ? 5/19/2020 8:29 AM

I have a few parts that I would like to list for sale. Is there a website where you can enter the part no. and have a list of all models that it will fit? TIA.

This forum thread has 12 replies.

New thread 2018 KX450 shock to 2019-2020 ? 5/12/2020 8:32 AM

Can I install/will an older 2018 KX450 shock into the newer/current generation chassis? MX-tech National shock.

This forum thread has 1 replies.

New thread WTB KTM 250/300 2-STROKE E-Start Parts 5/5/2020 12:08 PM

This is a bit of a long shot, but thought I would check with Vitalmx if anyone has 250 or 300 2-stroke e-start parts for sale. Mostly I'm interested in the stator cover, which holds the starter motor. This is for KTM 250 or 300 2-strokes (XC/XC-W) from ... more »

This forum thread has 0 replies.

New thread 2016 KTM 250SXF Common Problems Motor? 4/17/2020 10:50 AM

Does anyone have experience or links to old threads that discuss engine reliability on the 2016 KTMs and Husky 250F? I've read about transmission problems and I know this is a serious concern on the 16 KTM and Husky 250s. I don't want to buy one if its ... more »

This forum thread has 2 replies.

New thread 2021 KTM 250F Next Gen? 4/7/2020 10:49 PM

Does anyone know when we're expecting a new 250F from KTM? I'm dreaming about my next bike and I know this generation motor has been around since 2015.5 or so, right? I know we typically see big changes hit before SX, so maybe November 2020, allowing ... more »

This forum thread has 42 replies.

New thread Wanted: TTR90 rear spokes 4/3/2020 11:37 AM

I'm missing a couple of spokes on my son's TTR rear wheel build. Does anyone have a set of 12-inch rear wheel spokes and nipples? A full set is only $40, but thought I would check here first. They are the type with the 90 degree elbow at the head of ... more »

This forum thread has 1 replies.

New thread 2017 KTM 250SX Compression Base Gasket Selection ? 3/9/2020 9:37 AM

2017 KTM 250SX first piston and rings at 100hrs, checked compression at sea-level before tear-down at 195psi with stock cylinder head. Bike has been running well at the time of the tear-down. I replaced the piston and rings and base gasket with OEM parts, ... more »

This forum thread has 15 replies.

New thread Works Connection Footpeg Wideners 3/2/2020 1:21 PM

Teeth are looking pretty dull on my KTM pegs, primarily along the front edge of teeth (from riding like a goon, I guess, LOL). Was considering a set of Works Connection Footpeg Wideners and it seem like they would be a good/cheap fix for blunt teeth ... more »

This forum thread has 1 replies.

New thread Ultimate mud goggles 2/10/2020 1:52 PM

I've used roll-offs for years but I know that people are always coming up with new ways to build better goggles for wet weather. Since moving to Southern Calif, I feel like I need an update on what's been happening with wet weather goggles. I'm wondering ... more »

This forum thread has 5 replies.

New thread WTB MX GEAR 30 32 Medium pants Jersey 11/29/2019 2:40 PM

Anybody have some MX gear they want to sell? I typically fit a 30 or 32 pant medium jersey. I am looking for anything better than closeout deals on BTO/RMATV. Must be willing to ship and accept PayPal Venmo etc. Privateer life rules! 714)617-0955

This forum thread has 13 replies.

New thread Wanted: TTR90 plastics 11/22/2019 2:47 PM

My TTR90 pit bike has a cracked gas tank. Wanted: 2001 Yamaha TTR-90 gas tank. All years will work. Located Calif, 92626 Plastics are also a scratched and broken, might be interested in these too.

This forum thread has 0 replies.

New thread WTB Raw pipe 2017 KTM 250SX 9/25/2019 9:11 AM

Anyone with a good used/new raw pipe for a KTM 250SX in SoCal? Prefer Pro Circuit but might also consider others. I have a plated FMF so interested in trying something a little different and with that nice raw finish.

This forum thread has 0 replies.