cwtoyota

cwtoyota

Lives in: Tacoma, WA USA

Member since: 03/11/13

Recent Activity Filter:

Added reply in a thread Just a heads up on NBC Sports Gold 12/29/2019 7:05 PM

I may be able to expand a little, but not necessarily his specific issues... I have had the gold pass for Motocross since it became avalable (three or four years now) and I bought the SX pass last year too. I plan to buy it again and have no complaints, ... more »

Added reply in a thread 250 ktm sxf throttle body to yz250f conversion Can it be done ? 12/29/2019 4:27 PM

Some things you need to know about fuel injectors in general that will help when you swap things around. 1) There are different electrical values used by different injector types and manufacturers. The easy check is to measure the resistance (ohms) of ... more »

Added reply in a thread YZ125 PC Pipe - KX450F Devol Rad Guards (reduced) 12/29/2019 11:03 AM

bump

Added reply in a thread Saw some kid living out my dream... 12/26/2019 8:28 PM

This is my favorite clip from a moto movie. It's from "Time to Ride" circa 2001 or 2002. I captured it from my original VHS tape many years ago, so forgive the lower quality.

Added reply in a thread ISO yz250 .49 or .50 fork springs 12/26/2019 12:52 PM

You're right, I missed that change. Those springs wouldn't work with the stock perch height.

Added reply in a thread ISO yz250 .49 or .50 fork springs 12/26/2019 12:09 PM

FYI: A good source for these springs is from a 2014 - 2017 YZ450F. Those years had .49 and .50 in the forks depending on year. Racetech and Yamaha parts diagrams have the rates listed for each year.

Added reply in a thread YZ 250 for Sale or Part Out 12/23/2019 1:21 PM

I sent you an e-mail.

Added reply in a thread What is your new years Moto resolution? 12/20/2019 12:31 AM

I'll be hitting 40 this year... 2019 I got back to riding/racing after a few years off toward a college degree. I bought a KX500 in September with a lot of nostalgia tied to a buddy of mine who is age 80 and kinda mentored me into racing twenty-some ... more »

Added reply in a thread WTB: YZ125 Springs 12/16/2019 3:58 PM

I pm'd you my number and e-mail. If it doesn't go through, just send me an e-mail and I'll send you my number. Email address is the same as my forum user name @yahoo.com

Added reply in a thread WTB: YZ125 Springs 12/16/2019 11:15 AM

I have some OEM 2011 fork springs up on the shelf that have less than 10 hours on them. I switched up to 4.5 springs and some different valving when I got the bike. I believe you are correct that stock on that bike is a 4.2 in the fork.

Added reply in a thread YZ250 suspension question 12/13/2019 5:45 PM

Yamaha SSS KYB forks have some "float" in the free piston. You'll have a gap, or free play like you described. It's about 3/8 of an inch (by eye) on a stock fork. I haven't measured them, but I would guess it's meant to be 8mm. Did you try bleeding the ... more »

Added reply in a thread Need help: Kayaba Blue spring - Factory KYB Shock 12/13/2019 2:04 AM

https://www.kyb.co.jp/english/technical_report/data/no54e/06_technology_introduction_03.pdf

Added reply in a thread YZ125 PC Pipe - KX450F Devol Rad Guards (reduced) 12/9/2019 8:57 PM

... more »

Started new thread YZ125 PC Pipe - KX450F Devol Rad Guards (reduced) 12/9/2019 8:53 PM

YZ125 PC pipe, will fit 2005 through 2020, brand new never mounted on a bike. It was dropped and there's a small dent (see pics) $160 shipped (continental USA) Radiator guards, still in sealed bag from Devol with fasteners and instructions. Sticker says

... more »

This forum thread has 3 replies

Added reply in a thread '02. Yz250 running rich ? Help please 12/8/2019 8:38 PM

That's not how needle clip position and main jet size relate at all. Nothing personal, but that second sentence is not going to help anyone jet a bike properly. There are diagrams in every manual that show how jets relate to throttle position.

Added reply in a thread Has Any Track in America, In Recent Times, Tried “The Grand Experiment”? 12/6/2019 12:06 PM

It's a whole weekend. They have an open practice day on Saturday, anyone can ride but there's a two stroke only class. Saturday night it's basically a big party and not a four stroke in sight. Show and shine on the infield between the tower, whoops and ... more »

Added reply in a thread Lower pegs yz450f 12/1/2019 10:22 PM

This is the way to go if you like the design of the stock pegs. I run the 2010 YZ250F OEM pegs on my two-strokes... Probably the same part number as the '17 to '20 pegs you mentioned. I believe they are 5mm lower than the 450F model in 2014/2015.

Added reply in a thread Wp conevalve trouble 11/16/2019 4:18 PM

Grab both upper fork tubes (at or slightly above the red ring where the seals are) and rock them back and forth. If there is play, or you can hear the same sound, your steering stem bearings need to be checked out. If there's no play or noise at the ... more »

Added reply in a thread RC mini scrub in 1994? 11/12/2019 11:06 AM

Funny that Broc says "brush off speed"... brush and scrub being related words as they are. This is Steffy back in 1987:

Added reply in a thread Cerakote Awesomeness **Updated Pics!** 11/8/2019 10:29 PM

I would love to see some photos of well used Cerakoted parts. What does it look like when it chips, scratches or wears through? Someone must have some old coated parts with a ton of time on them.