dazza2

dazza2

Lives in: GBR

Member since: 10/10/16

Recent Activity Filter:

Reply to 2008 rm 125. Wide footpegs. 3/4/2020 10:16 AM

Cant answer your question unfortunately but bud racing also do some nice ti ones for the rm it might be worth a look

Reply to HRC Honda CR250 parts wanted. 2/17/2020 1:02 PM

seller:beppesx this guy on ebay has a couple of bits discs skid plate and a couple of other small bits if thats any help

Reply to Uk address format help 1/23/2020 11:54 AM

Sorry mate that was me I did eventually reply time difference and hectic work day that is the correct address it's for my work as written above Thanks for checking though

Reply to Wanted late model suzuki rm 125 cylinder 1/20/2020 6:08 AM

Thanks for the offer the heads the only part I don't just after a cylinder with power valves cheers anyway

Reply to Wanted late model suzuki rm 125 cylinder 1/18/2020 1:44 PM

Thanks ill give them a try are they used i can buy a new one from Europe its not too badly priced but im on a budget

Reply to Wanted late model suzuki rm 125 cylinder 1/18/2020 10:01 AM

Bumping this up hopefully someone has one they are willing to sell I'm really hoping not to buy a new one

Reply to Suzuki ebay cylinder need advice 1/15/2020 11:44 AM

Definitely won't then thanks

Reply to Suzuki ebay cylinder need advice 1/15/2020 9:11 AM

Thanks for the heads up i don't think I'll buy that one then cheers

New thread Suzuki ebay cylinder need advice 1/15/2020 7:45 AM

Ive been looking for a good used cylinder to fit an 07 rm 125 i found one on ebay but do the ports look standard

They look a bit shiny like someone's done some grinding in there but im no expert could do with another opinion Thanks ... more »

This forum thread has 4 replies.

Reply to Wanted late model suzuki rm 125 cylinder 1/12/2020 10:20 AM

I appreciate the offer but I think I'll hold on and see if i can find a later model cylinder but thanks anyway

Reply to Wanted late model suzuki rm 125 cylinder 1/12/2020 2:49 AM

Hi thanks for the replys I would need whichever model fits an 07 I thought it was 04 to 07 but doesn't sound like it from what's been said above I can a new cylinder for £442 including delivery I would like to find a used one to keep costs down and need ... more »

New thread Wanted late model suzuki rm 125 cylinder 1/11/2020 6:40 AM

Looking for a used stock suzuki rm 125 cylinder to fit 07 preferably with the power valve if anyone has one they would sell Thanks in advance Darren

This forum thread has 12 replies.

Reply to Hierarchy of Two Stroke Hop Ups 11/14/2019 9:17 AM

Reply to Suzuki rm 125 power valve help 7/12/2019 12:09 AM

i stuck a small screwdriver in there when undoing it i didnt realise it needed it going back together although its not done up overrly tight just nipped up to check i had done it right

Reply to Suzuki rm 125 power valve help 7/11/2019 1:46 PM

thanks for the info i was tring to move them with a socket turning the bolt in the side of the second picture i can get the arm to move but its not moving the valves im reasonably sure it did before

Reply to Suzuki rm 125 power valve help 7/11/2019 10:32 AM

i have more pictures now put it back in swapped the side parts of the power valve still cant get the mechanism to move im a bit stumped as to what it could be

... more »

Reply to Suzuki rm 125 power valve help 7/10/2019 12:05 AM

thanks for the reply its an 08 im not sure if i put the side ones the wrong side the main bit sits nicely up the exhaust port it just doesnt move when i turn the mechanism ill get more pictures later

Reply to Suzuki rm 125 power valve help 7/9/2019 11:57 AM

bumping this up because i could do with getting this done as the engine is in the way where it is

New thread Suzuki rm 125 power valve help 7/8/2019 9:24 AM

could do with some help for my rm 125 power valve i have just done a top end put the power valve back together but it doesn't move not sure if im putting it in the wrong way or something else could do with some advice

... more »

This forum thread has 9 replies.

Reply to purpose of the cut out in the side of 2 stroke piston 6/20/2019 1:36 PM

wiseco wrist pin is heavier also