Posts
775
Joined
9/7/2011
Location
Victorville, CA
US
Edited Date/Time
1/30/2020 5:57pm
I bought this low hour, all original '01 YZ250 from a friend who's dad out about 15 easy hours on it. The bike had original chain and sprockets and tires on it. He had converted it into a desert bike but still kept all of the original parts.
My goal was to return it to all stock and clean it as well as possible. The bike had such low hours that it still had the factory grease in all of the bearings. I freshened up the engine with all OEM parts and replaced what little it needed. I added an RG3 top clamp as it's rubber mounted and allows for oversized bars. Below is the finished bike. It was a fun project and blast from the past! I'm glad I saved her from going to the Black Plastic Crew where she would surely have been flogged haha.
My goal was to return it to all stock and clean it as well as possible. The bike had such low hours that it still had the factory grease in all of the bearings. I freshened up the engine with all OEM parts and replaced what little it needed. I added an RG3 top clamp as it's rubber mounted and allows for oversized bars. Below is the finished bike. It was a fun project and blast from the past! I'm glad I saved her from going to the Black Plastic Crew where she would surely have been flogged haha.
My hats off to you, enjoy!!!!
Give us a ride report.
The Shop
I had a 01 and loved it, should have never sold it
Post a reply to: '01 YZ250 refresh (low hour survivor)