Parting Out 2013 YZ250

yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763
Edited Date/Time 6/25/2019 8:42am
All prices are obo and do not include shipping. Parts are located in the central Florida area and I am able to meet. I can be found at any one of the local MX tracks in the area on any given Sunday.

Parts:

Cases, transmission and bottom end, no piston, stock clutch basket with new fiber plates. Cases are in great shape and the transmission has been swapped to the YZ250X 3rd, 4th and 5th gear. All transmission bearings and gears have about 3 hours on them. Main bearings and crank have about an hour and a half- $900

Keihin PWK w/ JD Jet Kit- $250

Linkage. Fresh pivot works bearings with about 3 hours on them - $150

Stock OEM Yamaha crank. Crank has about an hour and a half on it and is in great shape. $125

VForce intake and reeds- $100

CDI- $75

wo (2) Works connection clutch perches. One is blue and the other is red. The red one has a fresh motion pro cable installed and will ship with that cable. $65 each.

I work full time so please bear with me on my response time. Again, prices are obo and I’m open to offers or bulk pricing. The best way to get a hold of me is via mobile at 317-507-6636.
I accept Venmo, PayPal, cash, gold, guns and whatever else you might have.
2
|
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 8/28/2018 3:06pm
8/28/2018 3:06pm
mattyhamz2 wrote:
Do you have the linkage still?
Linkage is still available.
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 8/28/2018 3:45pm
8/28/2018 3:45pm
mattyhamz2 wrote:
How much?
$150. Is my post not showing the parts and prices?

The Shop

See All »
mattyhamz2
Profile picture for user mattyhamz2
Posts
10866
Joined
7/6/2015
Location
So Cal, CA US
Fantasy
767th
mattyhamz2 8/28/2018 3:58pm
8/28/2018 3:58pm
mattyhamz2 wrote:
How much?
yz763 wrote:
$150. Is my post not showing the parts and prices?
Sorry didn't see the linkage in there until just now
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 8/28/2018 4:05pm
8/28/2018 4:05pm
No worries! Just making sure we didn’t have a technical difficulty.
1
MX591
Profile picture for user MX591
Posts
5
Joined
8/24/2017
Location
Fort Worth, TX US
MX591 8/29/2018 1:22pm
8/29/2018 1:22pm
What color are the rims? Stock silver? And would you take $150 for the rear brake setup? I just picked up an ‘05 yz 250 I’m going through and I wish I could just take it all of your hands.
1
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 8/29/2018 5:54pm
8/29/2018 5:54pm
MX591 wrote:
What color are the rims? Stock silver? And would you take $150 for the rear brake setup? I just picked up an ‘05 yz 250 I’m...
What color are the rims? Stock silver? And would you take $150 for the rear brake setup? I just picked up an ‘05 yz 250 I’m going through and I wish I could just take it all of your hands.
The rims are stock silver Excel’s. Shoot me a text about the brakes.
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 9/2/2018 9:39am
9/2/2018 9:39am Edited Date/Time 9/2/2018 9:42am
franks144 wrote:
can you please email me at bcf510@gmail.com. I would like to take the vforce cage and galfer oversized kit off your hands.
V-Force is available. Email sent.
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 9/2/2018 9:42am
9/2/2018 9:42am Edited Date/Time 9/4/2018 6:14pm
Parts that are sold,

Cylinder
Piston
Front brake assembly
Oversized rotor and bracket
Pro Circuit pipe
Lectron
Subframe


If my prices seem too high, feel free to shoot me a text and let’s talk.
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 9/6/2018 10:11am
9/6/2018 10:11am
Updated prices and parts list. Again, I’m open to offers on any of this.
Hudd_421
Profile picture for user Hudd_421
Posts
645
Joined
2/17/2015
Location
TX US
Hudd_421 9/11/2018 2:18pm
9/11/2018 2:18pm
Few things...Is the swing arm in good shape (specifically the groove where the rear caliper slide in)

Do you happen to still have the stock power valve?
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 9/12/2018 5:29am
9/12/2018 5:29am
Hudd_421 wrote:
Few things...Is the swing arm in good shape (specifically the groove where the rear caliper slide in) Do you happen to still have the stock power...
Few things...Is the swing arm in good shape (specifically the groove where the rear caliper slide in)

Do you happen to still have the stock power valve?
The groove and swing arm are in great shape. The powervalve was sold with the cylinder and the governor is in the bottom end.
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 9/14/2018 9:19am
9/14/2018 9:19am
I’m getting notifications of PM’s but I do not have any messages. Please shoot me a text rather than private messages.

Pit Row

See All »
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 9/18/2018 2:37pm
9/18/2018 2:37pm
Prices updated.
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 9/22/2018 6:30pm
9/22/2018 6:30pm
Available parts updated.
mb60
Profile picture for user mb60
Posts
4742
Joined
3/7/2010
Location
GRAPEVINE, TX US
mb60 9/22/2018 10:19pm
9/22/2018 10:19pm
Can you post a picture of the tank and the shrouds please ?
JoePelletier
Profile picture for user JoePelletier
Posts
10
Joined
4/1/2017
Location
Fort Kent, ME US
Fantasy
2782nd
JoePelletier 9/27/2018 6:21pm
9/27/2018 6:21pm
Excellent doing business with you. Everything was well packaged and just as described. Thanks again.


4
cdoggy81
Profile picture for user cdoggy81
Posts
1313
Joined
1/1/2018
Location
St. Petersburg, FL US
cdoggy81 9/28/2018 7:23am
9/28/2018 7:23am Edited Date/Time 9/28/2018 7:24am
FYI if those were serviced by Ronnie @ six12 you will love them. He does great work! I just got mine back for the yz after I had them coated by my plater & they rock!

yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 11/19/2018 3:25pm
11/19/2018 3:25pm
Bump for an updated parts list. I am open to all offers so shoot me a text if you see something you are interested in.
79rippa
Profile picture for user 79rippa
Posts
7
Joined
7/18/2018
Location
Youngsville, LA US
79rippa 11/20/2018 5:46pm
11/20/2018 5:46pm
do you still have the vforce intake and reeds?
mb60
Profile picture for user mb60
Posts
4742
Joined
3/7/2010
Location
GRAPEVINE, TX US
mb60 11/22/2018 8:07pm
11/22/2018 8:07pm
sdhuskyrider wrote:
Got a fuel tank?
yz763 wrote:
Fuel tank is sold.
You still have the PC silencer for sale ?
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 1/10/2019 4:55pm
1/10/2019 4:55pm
sdhuskyrider wrote:
Got a fuel tank?
yz763 wrote:
Fuel tank is sold.
mb60 wrote:
You still have the PC silencer for sale ?
Sorry I missed these. Please be sure to send me a text at the number above as that will elicit a much faster response. If it’s listed, it is not sold and still available.
yz763
Profile picture for user yz763
Posts
769
Joined
2/6/2009
Location
Altamonte Springs, FL US
yz763 1/10/2019 4:55pm
1/10/2019 4:55pm
Parts list updated. Again, I am open to offers on any of this.

Post a reply to: Parting Out 2013 YZ250