Posts
19
Joined
9/19/2017
Location
Dubai
AE
Edited Date/Time
11/14/2017 11:31am
Parts are needed for a 2006 model KX250, 2-Stroke.
Clamps can be OEM, but must me from a 2002 model KX125/250 to meet my offset requirement. If clamps are Aftermarket, I’m open to any manufacturer (RG3, Applied, Pro Circuit etc).
I have no colour/finish preference, only for the clamps and linkage to be structurally perfect. Scratches and cosmetic flaws are no issue.
Thanks in advance!
Clamps can be OEM, but must me from a 2002 model KX125/250 to meet my offset requirement. If clamps are Aftermarket, I’m open to any manufacturer (RG3, Applied, Pro Circuit etc).
I have no colour/finish preference, only for the clamps and linkage to be structurally perfect. Scratches and cosmetic flaws are no issue.
Thanks in advance!
The Shop
If they work let me know if touch buy and can't use them ill gladly take them back and refund you (minus shipping to and from). 310$shipped
As far as I know, the only 250F options which will work ID wise are ‘04’s & ‘05’s - but then the OEM stlye offsets are still not going to work for me.
To be sure of the offset, ‘02 OEM 125/250 clamps will work, the ‘04-‘05 250F (but 21mm/22mm aftermarket sets only, not OEM), then ‘05-‘07 250 which also need to be aftermarket 21mm/22mm offset.
I don’t want to come off as an a***ole being so specific, but the specs are to help solve a handling issue that the OEM 25mm clamps cause.
I thought offset is offset and is not depending upon what year and model the clamps are for. Its the measurement from the center of the stem to the center of where the fork mounts.
Post a reply to: Wanted: 21/22mm Offset Clamps & PC Linkage