Cone valve settings

nunoktm1980
Profile picture for user nunoktm1980
Posts
7
Joined
4/20/2020
Location
Philadelphia, PA US
nunoktm1980
Ktm 250f 19
I’m 140lb 30plus B rider
Forks setting 43 spring and 410cc 12 comp reb 13
Shock 39 spring lsc 15 hsp 40 reb 20
Any one have good settings to share with same ou closer weight about spring rates and settings ?
Thank you
|
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo 4/20/2020 2:44pm
4/20/2020 2:44pm
nunoktm1980 wrote:
Ktm 250f 19 I’m 140lb 30plus B rider Forks setting 43 spring and 410cc 12 comp reb 13 Shock 39 spring lsc 15 hsp 40 reb...
Ktm 250f 19
I’m 140lb 30plus B rider
Forks setting 43 spring and 410cc 12 comp reb 13
Shock 39 spring lsc 15 hsp 40 reb 20
Any one have good settings to share with same ou closer weight about spring rates and settings ?
Thank you
It's very hard to say without knowing what valving you have in there.

Is it the new kit from WP with stock valving?

Who set them up?
1
nunoktm1980
Profile picture for user nunoktm1980
Posts
7
Joined
4/20/2020
Location
Philadelphia, PA US
nunoktm1980 4/20/2020 3:30pm
4/20/2020 3:30pm
I’m new on cone valves! Forks were done by powerband not complaining at all I just hear riders saying they don’t feeling breaking bumps and they are super plusher and they have good bottom on landings but mine don’t work as good as others saying! They are little better than stock but not that crazy good as I hear!
I just want know if some one has same weight and Ktm and what setting they have so I can compare with my cv
ML512
Profile picture for user ML512
Posts
15455
Joined
12/28/2008
Location
Wildomar, CA US
Fantasy
45th
ML512 4/20/2020 4:47pm
4/20/2020 4:47pm
nunoktm1980 wrote:
I’m new on cone valves! Forks were done by powerband not complaining at all I just hear riders saying they don’t feeling breaking bumps and they...
I’m new on cone valves! Forks were done by powerband not complaining at all I just hear riders saying they don’t feeling breaking bumps and they are super plusher and they have good bottom on landings but mine don’t work as good as others saying! They are little better than stock but not that crazy good as I hear!
I just want know if some one has same weight and Ktm and what setting they have so I can compare with my cv
Have you called Billy at Powerband to discuss what you're feeling and what changes they recommend?
nunoktm1980
Profile picture for user nunoktm1980
Posts
7
Joined
4/20/2020
Location
Philadelphia, PA US
nunoktm1980 4/20/2020 5:14pm
4/20/2020 5:14pm
ML512 wrote:
Have you called Billy at Powerband to discuss what you're feeling and what changes they recommend?
Yes I just called him he gave some changes for me to try before we go for new setting

The Shop

See All »
AJ565
Profile picture for user AJ565
Posts
2079
Joined
3/12/2012
Location
San Antonio, TX US
AJ565 4/20/2020 6:10pm
4/20/2020 6:10pm
ML512 wrote:
Have you called Billy at Powerband to discuss what you're feeling and what changes they recommend?
nunoktm1980 wrote:
Yes I just called him he gave some changes for me to try before we go for new setting
Then why are you asking us if the guy that valved them have you new settings to try?
nunoktm1980
Profile picture for user nunoktm1980
Posts
7
Joined
4/20/2020
Location
Philadelphia, PA US
nunoktm1980 4/20/2020 6:30pm
4/20/2020 6:30pm
ML512 wrote:
Have you called Billy at Powerband to discuss what you're feeling and what changes they recommend?
nunoktm1980 wrote:
Yes I just called him he gave some changes for me to try before we go for new setting
AJ565 wrote:
Then why are you asking us if the guy that valved them have you new settings to try?
Sorry I don’t think you understanding what I’m asking
langhammx
Profile picture for user langhammx
Posts
8928
Joined
5/5/2011
Location
Santa Clarita, CA US
Fantasy
455th
langhammx 4/20/2020 9:16pm
4/20/2020 9:16pm
nunoktm1980 wrote:
I’m new on cone valves! Forks were done by powerband not complaining at all I just hear riders saying they don’t feeling breaking bumps and they...
I’m new on cone valves! Forks were done by powerband not complaining at all I just hear riders saying they don’t feeling breaking bumps and they are super plusher and they have good bottom on landings but mine don’t work as good as others saying! They are little better than stock but not that crazy good as I hear!
I just want know if some one has same weight and Ktm and what setting they have so I can compare with my cv
Did Billy valve them for you or did you buy them used ? I’ve owned several sets that Billy set up for me and have been super happy with all of them.
Motocross-
‘14.5 SXF 450
‘15.5 SXF 450
‘19 SX 150
Off-road-
‘19 XCW 300
‘18 EXC 500

nunoktm1980
Profile picture for user nunoktm1980
Posts
7
Joined
4/20/2020
Location
Philadelphia, PA US
nunoktm1980 4/21/2020 6:29am
4/21/2020 6:29am
nunoktm1980 wrote:
I’m new on cone valves! Forks were done by powerband not complaining at all I just hear riders saying they don’t feeling breaking bumps and they...
I’m new on cone valves! Forks were done by powerband not complaining at all I just hear riders saying they don’t feeling breaking bumps and they are super plusher and they have good bottom on landings but mine don’t work as good as others saying! They are little better than stock but not that crazy good as I hear!
I just want know if some one has same weight and Ktm and what setting they have so I can compare with my cv
langhammx wrote:
Did Billy valve them for you or did you buy them used ? I’ve owned several sets that Billy set up for me and have been...
Did Billy valve them for you or did you buy them used ? I’ve owned several sets that Billy set up for me and have been super happy with all of them.
Motocross-
‘14.5 SXF 450
‘15.5 SXF 450
‘19 SX 150
Off-road-
‘19 XCW 300
‘18 EXC 500

What is your weight ? What preload are you used ? What sag ? And spring ?
nunoktm1980
Profile picture for user nunoktm1980
Posts
7
Joined
4/20/2020
Location
Philadelphia, PA US
nunoktm1980 4/21/2020 6:47am
4/21/2020 6:47am
Aussie_power_sports wrote:
You want strangers on the internet to give you clicker settings for your forks?
I’m new with cone valves and were did for me but not impressed at all this time but maybe it just the forks that are not good as I was expected! I saw in some forum that some riders love them just want to see what king springs rates, cc oil and sags they have to see if I can compare with mine because some time a little changes can make them work perfect! It’s just what I’m looking for
cody41
Profile picture for user cody41
Posts
518
Joined
4/25/2013
Location
Miami, FL US
cody41 4/22/2020 4:37am
4/22/2020 4:37am
Buys cone valve forks - doesn’t know how suspension clickers work.
2

Post a reply to: Cone valve settings