03 RM125 bent triple clamps

john223
Profile picture for user john223
Posts
7
Joined
11/23/2018
Location
Lodi, CA US
john223
I have an 03 rm125 with bent triple clamps top and bottom I have no idea how you do that but the previous owner did, but I’m looking for a new (used) set of clamps off of eBay but I have no idea what years and models are interchangeable with my bike and fork size? any knowledge would be greatly appreciated
|
kb228
Profile picture for user kb228
Posts
6161
Joined
1/31/2018
Location
Mansfield, OH US
kb228 11/23/2018 3:56pm
11/23/2018 3:56pm
Look up the partnumbers on rockymountain for diff years. Thats how you know
1
psr racing 11/23/2018 7:33pm
11/23/2018 7:33pm
You can use the clamps from a newer 05 upwards rm 125! I did this mod to my 02 bike to change the offset and enable me to run oversize bars
1
john223
Profile picture for user john223
Posts
7
Joined
11/23/2018
Location
Lodi, CA US
john223 11/23/2018 8:24pm
11/23/2018 8:24pm
psr racing wrote:
You can use the clamps from a newer 05 upwards rm 125! I did this mod to my 02 bike to change the offset and enable...
You can use the clamps from a newer 05 upwards rm 125! I did this mod to my 02 bike to change the offset and enable me to run oversize bars
It’s hard to find a set of them, I found a full pro Circuit setup for 225$ on eBay that’s off of an RMZ and they say it’ll bolt up to an RM but I’m worried about the fork tube diameter
john223
Profile picture for user john223
Posts
7
Joined
11/23/2018
Location
Lodi, CA US
john223 11/23/2018 9:04pm
11/23/2018 9:04pm
psr racing wrote:
You can use the clamps from a newer 05 upwards rm 125! I did this mod to my 02 bike to change the offset and enable...
You can use the clamps from a newer 05 upwards rm 125! I did this mod to my 02 bike to change the offset and enable me to run oversize bars
Also did the forks fit in the clamps or did you have to shim them?

The Shop

See All »
woodsgoon
Profile picture for user woodsgoon
Posts
117
Joined
11/24/2018
Location
IN US
woodsgoon 11/24/2018 7:20am
11/24/2018 7:20am
I made a profile just to get on here and ask a very similar question. I couldnt find the answer anywhere. I need just the top clamp so i can run a set of Xcgear Mako360s on my 03 rm125. i have a buddy willing to cnc me one out of a chunk of 7075. Lance at xcgear replied and said that if i got a top clamp off of one with removeable bare mounts that they had a set that would fit. So i started searching if the 05+ top clamp would fit my 03. Cant find the answer. Some say it will work, some say it wont but if you get on Motosport.com they have an applied top clamp for sale that says it fits an 05 but doesnt fit an 03 so it seems something is different. Not trying to steal your thread, im just looking for similar information and thought i would share what ive found......
1
Talisker
Profile picture for user Talisker
Posts
889
Joined
10/25/2018
Location
Houston, TX US
Talisker 11/24/2018 9:51am
11/24/2018 9:51am
kb228 wrote:
Look up the partnumbers on rockymountain for diff years. Thats how you know
After you find the part number, go to suzukipartshouse.com
Scroll to the bottom of the page. Enter part number. On the next page click "where used". It will list all year models used.

ASSEMBLIES WHERE 51410-36F00 IS USED
2001 RM125 - STEERING STEM (MODEL K1)
2002 RM125 - STEERING STEM (MODEL K1)
2003 RM125 - STEERING STEM (MODEL K1)
2004 RM125 - STEERING STEM (MODEL K1)
2005 RM125 - STEERING STEM (MODEL K1)
2006 RM125 - STEERING STEM (MODEL K1)
1
woodsgoon
Profile picture for user woodsgoon
Posts
117
Joined
11/24/2018
Location
IN US
woodsgoon 11/24/2018 10:30am
11/24/2018 10:30am
kb228 wrote:
Look up the partnumbers on rockymountain for diff years. Thats how you know
Talisker wrote:
After you find the part number, go to suzukipartshouse.com Scroll to the bottom of the page. Enter part number. On the next page click "where used"...
After you find the part number, go to suzukipartshouse.com
Scroll to the bottom of the page. Enter part number. On the next page click "where used". It will list all year models used.

ASSEMBLIES WHERE 51410-36F00 IS USED
2001 RM125 - STEERING STEM (MODEL K1)
2002 RM125 - STEERING STEM (MODEL K1)
2003 RM125 - STEERING STEM (MODEL K1)
2004 RM125 - STEERING STEM (MODEL K1)
2005 RM125 - STEERING STEM (MODEL K1)
2006 RM125 - STEERING STEM (MODEL K1)
well that is probably the most helpful thing ive ever learned on a forum. One quick question. What does the k1 k2 k3 k4 k5 k6 models mean?
1
john223
Profile picture for user john223
Posts
7
Joined
11/23/2018
Location
Lodi, CA US
john223 11/24/2018 11:28pm
11/24/2018 11:28pm
kb228 wrote:
Look up the partnumbers on rockymountain for diff years. Thats how you know
Talisker wrote:
After you find the part number, go to suzukipartshouse.com Scroll to the bottom of the page. Enter part number. On the next page click "where used"...
After you find the part number, go to suzukipartshouse.com
Scroll to the bottom of the page. Enter part number. On the next page click "where used". It will list all year models used.

ASSEMBLIES WHERE 51410-36F00 IS USED
2001 RM125 - STEERING STEM (MODEL K1)
2002 RM125 - STEERING STEM (MODEL K1)
2003 RM125 - STEERING STEM (MODEL K1)
2004 RM125 - STEERING STEM (MODEL K1)
2005 RM125 - STEERING STEM (MODEL K1)
2006 RM125 - STEERING STEM (MODEL K1)
woodsgoon wrote:
well that is probably the most helpful thing ive ever learned on a forum. One quick question. What does the k1 k2 k3 k4 k5 k6...
well that is probably the most helpful thing ive ever learned on a forum. One quick question. What does the k1 k2 k3 k4 k5 k6 models mean?
The k’s just stand for 2000 so k1 2001 k2 2002 so on and so on
1
john223
Profile picture for user john223
Posts
7
Joined
11/23/2018
Location
Lodi, CA US
john223 11/24/2018 11:29pm
11/24/2018 11:29pm
kb228 wrote:
Look up the partnumbers on rockymountain for diff years. Thats how you know
Talisker wrote:
After you find the part number, go to suzukipartshouse.com Scroll to the bottom of the page. Enter part number. On the next page click "where used"...
After you find the part number, go to suzukipartshouse.com
Scroll to the bottom of the page. Enter part number. On the next page click "where used". It will list all year models used.

ASSEMBLIES WHERE 51410-36F00 IS USED
2001 RM125 - STEERING STEM (MODEL K1)
2002 RM125 - STEERING STEM (MODEL K1)
2003 RM125 - STEERING STEM (MODEL K1)
2004 RM125 - STEERING STEM (MODEL K1)
2005 RM125 - STEERING STEM (MODEL K1)
2006 RM125 - STEERING STEM (MODEL K1)
Very helpful thankyou
john223
Profile picture for user john223
Posts
7
Joined
11/23/2018
Location
Lodi, CA US
john223 11/24/2018 11:31pm
11/24/2018 11:31pm
woodsgoon wrote:
I made a profile just to get on here and ask a very similar question. I couldnt find the answer anywhere. I need just the top...
I made a profile just to get on here and ask a very similar question. I couldnt find the answer anywhere. I need just the top clamp so i can run a set of Xcgear Mako360s on my 03 rm125. i have a buddy willing to cnc me one out of a chunk of 7075. Lance at xcgear replied and said that if i got a top clamp off of one with removeable bare mounts that they had a set that would fit. So i started searching if the 05+ top clamp would fit my 03. Cant find the answer. Some say it will work, some say it wont but if you get on Motosport.com they have an applied top clamp for sale that says it fits an 05 but doesnt fit an 03 so it seems something is different. Not trying to steal your thread, im just looking for similar information and thought i would share what ive found......
I’m sure they do but like I said they’re hard to find. RMZ triple clamps are so much more abundant especially used aftermarket ones I really want to know what rmz clamps will work on an RM
Talisker
Profile picture for user Talisker
Posts
889
Joined
10/25/2018
Location
Houston, TX US
Talisker 11/25/2018 12:35am
11/25/2018 12:35am
kb228 wrote:
Look up the partnumbers on rockymountain for diff years. Thats how you know
Talisker wrote:
After you find the part number, go to suzukipartshouse.com Scroll to the bottom of the page. Enter part number. On the next page click "where used"...
After you find the part number, go to suzukipartshouse.com
Scroll to the bottom of the page. Enter part number. On the next page click "where used". It will list all year models used.

ASSEMBLIES WHERE 51410-36F00 IS USED
2001 RM125 - STEERING STEM (MODEL K1)
2002 RM125 - STEERING STEM (MODEL K1)
2003 RM125 - STEERING STEM (MODEL K1)
2004 RM125 - STEERING STEM (MODEL K1)
2005 RM125 - STEERING STEM (MODEL K1)
2006 RM125 - STEERING STEM (MODEL K1)
woodsgoon wrote:
well that is probably the most helpful thing ive ever learned on a forum. One quick question. What does the k1 k2 k3 k4 k5 k6...
well that is probably the most helpful thing ive ever learned on a forum. One quick question. What does the k1 k2 k3 k4 k5 k6 models mean?

Z- 1982
D- 1983
E- 1984
F- 1985
G- 1986
H- 1987
J- 1988
K- 1989
L- 1990
M- 1991
N- 1992
P- 1993
R- 1994
S- 1995
T- 1996
V- 1997
W- 1998
X- 1999
Y- 2000
K1- 2001
K2- 2002
K3- 2003
K4- 2004
K5- 2005
K6- 2006
K7- 2007
K8- 2008
K9- 2009
L0- 2010
L1- 2011
L2- 2012
L3- 2013
L4- 2014
psr racing 11/26/2018 2:08am
11/26/2018 2:08am
The top clamp off a newer model 2004 up won’t fit on its own as the offset is different... you’ll need to change as a complete set! But yes the forks fit without shimming!

Post a reply to: 03 RM125 bent triple clamps