125 2 stroke pipe

callum831
what is the best pipe and silencer for a husqvarna TC 125 2018 that will give it a little bit more bottom end
|
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 6/11/2018 8:11pm
6/11/2018 8:11pm
If you want more bottom or rather mid range try the fmf fatty
CarlinoJoeVideo
Profile picture for user CarlinoJoeVideo
Posts
7358
Joined
11/30/2013
Location
Portland/Los Angeles, CA US
Fantasy
2339th
CarlinoJoeVideo 6/12/2018 6:54am
6/12/2018 6:54am
Within the FMF line I’ve tried a bunch of combinations and the Fatty with the shorty gave me the most bottom end.

Also adjusting your power valve to hit where you want, makes a difference.
Rickyisms
Profile picture for user Rickyisms
Posts
4224
Joined
10/5/2017
Location
FL US
Rickyisms 6/12/2018 9:49am
6/12/2018 9:49am
I'm running a pro circuit r304 silencer with a modded works pipe, I have stock 125 and 150 motors and mod motor 125. The pipe helped the stock bike a lot on the bottom and didn't take away much from the top, and even after messing with jetting i could never get it to run right with the stock setup.

The Shop

See All »
YZed250
Profile picture for user YZed250
Posts
1051
Joined
11/9/2014
Location
Costa Mesa, CA US
YZed250 6/13/2018 11:29am
6/13/2018 11:29am
There is recent thread on thumpertalk about a guy developing his 125sx. He said the Mikuni was his best bang for buck.
Bruce372
Profile picture for user Bruce372
Posts
6341
Joined
4/1/2008
Location
US
Bruce372 6/17/2018 10:38am
6/17/2018 10:38am
We dynoed that hgs pipe on a brand new 150sx and it made less power than the stock pipe

Post a reply to: 125 2 stroke pipe