Related:
Create New Tag
Naanak Naanak
10/3/2018 5:59 PM

Does anyone know or have picture of what goes under the top clamp. I bought a used set and was told to use all the stock stuff. I can’t adjust how tight the steering is it’s just floppy.

| Quote
samcampbell samcampbell
10/3/2018 10:12 PM
Photo

Not a great picture but it should help. Don’t use the nut that goes under the top triple clamp. You tighten up your steering by tightening the steering stem nut. Need to make sure the pinch bolt is loose on the steering stem as well as the pinch bolts on the top triple clamp so that the top clamp can actually be tightened. Then tighten everything back up as you normally would. Hope this helps.
| Quote
Naanak Naanak
10/4/2018 2:59 PM
samcampbell wrote:

Not a great picture but ...more

Besides the bearing and the dust seal is there anything else or is it just the dust seal against the top clamp? I followed the manual so it should have worked like you said.

| Quote
samcampbell samcampbell
10/4/2018 3:54 PM

I want to say there is a washer that goes between the dust seal and the top clamp.

| Quote
Naanak Naanak
10/4/2018 7:09 PM
samcampbell wrote:

I want to say there is a ...more

Okay thanks for the help that’s probably it.

| Quote

Post a Reply

Cool Wink Smile Tongue Laughing Shocked Sick Angry Blink Sad Unsure Kissing Woohoo Grinning Silly Pinch Sideways Whistling Evil Dizzy Blush Cheerful Huh Dry