Posts
5
Joined
12/11/2016
Location
CA
Edited Date/Time
3/7/2018 10:40pm
My buddy bought a trashed 2010 yz250f and im sure the previous owner had WR parts on it.
What forks and swingarm is that and can that be used on that bike? We also need a front caliper that will fit on this fork.
What forks and swingarm is that and can that be used on that bike? We also need a front caliper that will fit on this fork.
5XC-2580T-G0-00
Any Yamaha caliper from 2006-2013 will work.
Other brands will also work, but they have different part numbers and I’m too lazy to go looking for them
As for the forks, any set of Yamaha forks from I believe 04 to 13 will interchange, off any Yamaha bike.
The inner tubes should have a diameter of 48mm. You can’t use forks from 14+ since the clamping diameters on the outer tubes changed.
Also buy some swingarm plugs so it doesn’t get packed with mud or water.
I can see if I have a spare caliper sitting around if you’d like, or you can check eBay since there are tons of 250f part outs there.
Post a reply to: 2010 yz250f parts identification