49mm conventional showa lug removal

beamer
Posts
782
Joined
8/16/2006
Location
Squaw River CA
4/21/2018 9:01pm
How do you do it? Looking to get the fork lowers anodized while they are apart for a rebuild. I don't see a set screw, etc.

Thanks
|
RCF
Posts
546
Joined
4/1/2008
Location
PA US
4/22/2018 2:02am
I use a seal driver and an old tube, rap the tube around the fork put the seal driver on rubber and place Fork leg in a vice, take a rubber mallet after Heating the lower Fork up just start tapin it until it comes loose.
4/22/2018 6:30am
They are held on by a shit ton of red loctite and threaded onto the bottom
beamer
Posts
782
Joined
8/16/2006
Location
Squaw River CA
4/22/2018 9:07am
Thanks for the replies


Does anybody have the manual for a ‘98 rm 125 or 250? Looking for the fork disassembly procedure ,

Post a reply to: 49mm conventional showa lug removal

The Latest