Posts
34
Joined
2/6/2017
Location
Troy, KS
US
Edited Date/Time
7/30/2020 8:29am
I haven’t linked up to my GET ecu in over a year. This weekend I decided to do a couple of adjustments.
Upon connection I got a message stating I needed an update. I agreed to update, but the update will not complete. Anyone else run into this problem?
I am getting this message
Upon connection I got a message stating I needed an update. I agreed to update, but the update will not complete. Anyone else run into this problem?
I am getting this message
Dan
941-896-7903
Could someone solve this problem already?
The Shop
Close all the apps on your phone, make sure your phone is updated to the latest software and the GET app is also.
Start the bike, once the green light comes on (on the WiFi com)
Then go to settings, make sure you connect to the WiFi com and type in password if needed. Once the check mark is there then open the GET APP.
You can also try these steps in the attached pics.
If you need more help contact me direct.
Dan
941-896-7903
On some models you'll need to jumper connectors together in order to do the work with the bike off.
I have a fantic XXF 250 i download the app it rewding the info when i connect but when i m going to +add vehicle it stucks at connecting can anyone help me thanks!!
Post a reply to: Athena GET will not update