Husky TX300 Clutch not engaging all the way

Kennyfreemoney
Maybe this is normal, not sure. When the bike is off and in gear, even with the clutch pulled, it won't roll. If the bike is running the clutch engages enough to keep it from stalling. Is it possible to adjust the engagement? My previous bike had a rekluse so i didn't notice if it did a similar thing
|
DTR830
Profile picture for user DTR830
Posts
964
Joined
8/14/2017
Location
Mountain Top, PA US
Fantasy
1105th
DTR830 11/14/2018 7:51pm
11/14/2018 7:51pm
oem levers or arc?
Paw Paw 271
Profile picture for user Paw Paw 271
Posts
3640
Joined
4/3/2013
Location
Benton, LA US
Paw Paw 271 11/15/2018 9:16am
11/15/2018 9:16am
Bikes don't roll easy with the clutch pulled in and in gear. It is the nature of the gear reduction system in the trans. Remember that you have a very low overall gearing due to the engines high rpm limits and the speeds derived from said gearing. It is a big mechanical advantage and thus it will not roll easy that way. That is normal.

Paw Paw
1
Kennyfreemoney 11/15/2018 9:17am
11/15/2018 9:17am
Paw Paw 271 wrote:
Bikes don't roll easy with the clutch pulled in and in gear. It is the nature of the gear reduction system in the trans. Remember that...
Bikes don't roll easy with the clutch pulled in and in gear. It is the nature of the gear reduction system in the trans. Remember that you have a very low overall gearing due to the engines high rpm limits and the speeds derived from said gearing. It is a big mechanical advantage and thus it will not roll easy that way. That is normal.

Paw Paw
Good to know. Thanks

The Shop

See All »
sandman768
Profile picture for user sandman768
Posts
6071
Joined
3/21/2014
Location
Saratoga Springs, NY US
sandman768 11/16/2018 6:10pm
11/16/2018 6:10pm
Could have air in system, if it creeps when you put it in gear, with clutch pulled in...may need to bleed line...

Post a reply to: Husky TX300 Clutch not engaging all the way