Preload spacers 87 CR250

Hudweiser9
Posts
445
Joined
4/8/2014
Location
Ormond Beach, FL US
10/29/2017 10:07am
I purchased new fork springs from Race Tech recently. Instructions say 4mm of pre-load is the standard amount. My question is, how long should I cut the PVC piece that came with the springs for my weight and ability? I'm 6ft 2in tall and weigh 205, intermediate vet rider. Ride moto only, mostly sand type tracks in FL. I'm thinking I will need more pre-load than standard. I emailed Race Tech, sent me back a link on assembly / disassembly. Thanks everyone.
|

Post a reply to: Preload spacers 87 CR250

The Latest