Posts
37
Joined
6/20/2017
Location
Seaford, DE
US
Hey all, rebuilding my RMX250 I just got, and found I need a few studs. 1 that goes into the case from the cylinder, and 1 or more possibly for the cylinder head to the cylinder itself.
Is there a place that sells these? Haven't had much luck with old google finding them.
Is there a place that sells these? Haven't had much luck with old google finding them.
The one from Cylinder to head is 09108-08224. MSRP=$5.77.
The one from cases to cylinder is not listed in the EPC, but I would bet it is the same one. The only other stud I can find in the system in similar models is for a '96-'97 RM250: 09108-08227. The stud length is the same, so I'm not sure if it's a different thread pitch or what. Even that is also only for the cylinder to head juncture.
The 1994 microfische does not show them. As mentioned try a cylinder stud and see if they are the same.
$1.77 each from Motosport.
Part #5
http://www.motosport.com/dirtbike/oem-parts/suzuki/1994/rmx250t/cylinder
The Shop
http://www.midwestactioncycle.com/OEMpartfinder.htm#/Suzuki_Motor_of_Am…
Also, my local dealer has a complete 1989 RMX250 engine...locked up, but certainly has some good parts. Also, there's an 89-92 RM owners group on Facebook. Lots of parts interchange, so you might find some help there
http://www.gollans.com/
Their phone number is: (330) 369-3700
Ask for Adam Gollan, and tell him your interested in the RMX250 engine that's in the back and that Leon told you about it
Post a reply to: RMX250 Cylinder stud question