Related:
Create New Tag
Andy7 Andy7
1/30/2019 3:45 PM

Hi guys, we recently installed a graphics kit on a YZ 250 and the tank ones are starting to have air bubbles. I know it is beacause of fuel gases, but how can the original graphics stay put and never have this problem? Is there anything you can do to prevent this from happening? Thanks

Heavy Hitter

| Quote
mattyhamz2 mattyhamz2
1/30/2019 4:07 PM
Andy7 wrote:

Hi guys, we recently ...more

Weird isn't it? Mine are perforated and still bubble. It sucks. Nothing I know of to fix it other than pushing them out.

2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F

80% of the time it works every time
IG @hamdaddyof2 & @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals

| Quote
Andy7 Andy7
1/30/2019 4:41 PM
mattyhamz2 wrote:

Weird isn't it? Mine are ...more

I don't know how difficult it is to design shrouds that cover the tank haha. The graphics guy told me that the original ones are made of a special material that lets the gases flow through them without bubbling, but he cannot find it.

Heavy Hitter

| Quote
mattyhamz2 mattyhamz2
1/30/2019 4:44 PM
Andy7 wrote:

Hi guys, we recently ...more

mattyhamz2 wrote:

Weird isn't it? Mine are ...more

Andy7 wrote:

I don't know how difficult ...more

Lol. Are your perforated at least?

2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F

80% of the time it works every time
IG @hamdaddyof2 & @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals

| Quote
Andy7 Andy7
1/30/2019 4:48 PM
mattyhamz2 wrote:

Lol. Are your perforated ...more

Yes they are, but once the glue is done I'm screwed

Heavy Hitter

| Quote
mattyhamz2 mattyhamz2
1/30/2019 4:50 PM
Andy7 wrote:

I don't know how difficult ...more

mattyhamz2 wrote:

Lol. Are your perforated ...more

Andy7 wrote:

Yes they are, but once the ...more

When mine bubbled up I started working the bubbles out and got most of them and now it looks almost like it did when I first put them on

2017 RMZ450
2005 YZ250-sold :,(
1998 YZ250
2005 KX250F

80% of the time it works every time
IG @hamdaddyof2 & @2HRacing
Thanks to : Factory Effex, N2Dirt, Acerbis, DT1, Fasthouse, Matix, FMF, ASV, 100% & Mika Metals

| Quote
Alec138 Alec138
1/30/2019 6:34 PM

I had the same issue on my yz250 tank graphics. I installed them, looked great and next day looked awful. I was tempted to tear em off but i rode more and more with them and they stopped bubbling as bad. Also another resason why i dont get a design that the tank graphics are essential to the look.

| Quote
FGR01 FGR01
1/30/2019 6:52 PM

I have no bubbling on either my YZ125 or YZ250. Graphics are from DeCal Works and have been on there for years. I think it's a good idea to completely drain the tank first, wash it out with soap and water, let it dry out completely (days), apply the graphics, and then let it dry completely again for days before putting gas in. That lets the adhesive cure before the gas fumes start attacking it.

Powerband in every gear !

| Quote
aedwards07 aedwards07
1/31/2019 7:59 AM

Post a picture of your tank graphics.

| Quote
YZed250 YZed250
1/31/2019 8:26 AM
Andy7 wrote:

Hi guys, we recently ...more

OEM graphics have a special glue that is resistant to fumes: two parts whale sperm, one part fairy dust. That and they are applied before the tank is 'saturated' with gas, and therefore, it is able to bond.

KTM250SX YZ125 YZ85 PW80 ZX6 FZX700

| Quote
SBD SBD
1/31/2019 11:52 AM

The perforated tank graphics do that on every bike. As soon as I got graphics that were not perforated, i have never had an issue. Also, are you using a heat gun to apply ? This helps them stick really good, at minimum let them sit out in the sun before applying, so they are more pliable and stick better.

Not sure why you would need to empty the gas tank like someone mentioned? hmm, just make sure the outside is nice and clean.

| Quote
smezmx smezmx
2/9/2019 12:22 PM
Andy7 wrote:

Hi guys, we recently ...more

mattyhamz2 wrote:

Weird isn't it? Mine are ...more

Andy7 wrote:

I don't know how difficult ...more

You can buy these carbon fibre tank covers on ebay...the older the tank the more it will happen as the plastic deteriorate's over time....
Link here...https://www.ebay.co.uk/itm/CARBON-TANK-COVER-YAMAHA-YZ-125-250-2005-2018/232963254939?hash=item363db12a9b:g:YM8AAOSw011bj~64



| Quote
Andy7 Andy7
2/10/2019 6:57 AM
smezmx wrote:

You can buy these carbon ...more

Didn't know about them, thanks a lot!

Heavy Hitter

| Quote
smezmx smezmx
2/10/2019 7:56 AM
Andy7 wrote:

I don't know how difficult ...more

smezmx wrote:

You can buy these carbon ...more

Andy7 wrote:

Didn't know about them, ...more

No worry's these guy's in japan also make good quality plastic full coverage tank shrouds for the yz in white black blue and carbon effect...a few freestyle guy's use them....this allows colour change with no bubbles...
Link here https://m.facebook.com/story.php?story_fbid=959630587433958&id=500137910049897&anchor_composer=false

| Quote
FGR01 FGR01
2/10/2019 6:00 PM
SBD wrote:

The perforated tank ...more

It helps to drain the tank because the gas fumes creep right through the plastic. That's what causes the bubbling of the graphics. If you drain it and clean it out it gives the adhesive a chance to cure before you put gas in again.

Powerband in every gear !

| Quote
Mx-de bruin Mx-de bruin
1/16/2020 5:55 AM
Andy7 wrote:

Hi guys, we recently ...more

Warm it up with a hair fohn, push the bubble`s away, 3 a 4 days replay and its oke.

| Quote

Post a Reply

Cool Wink Smile Tongue Laughing Shocked Sick Angry Blink Sad Unsure Kissing Woohoo Grinning Silly Pinch Sideways Whistling Evil Dizzy Blush Cheerful Huh Dry