Related:
Create New Tag
honda70 honda70
1/23/2018 6:35 PM

base gasket thickness sqiush 110mm or 43 thousands

[Moto D Racing

| Quote
KTM Two Stroke KTM Two Stroke
1/24/2018 8:08 AM
Photo

Photo

| Quote
KTM Two Stroke KTM Two Stroke
1/24/2018 8:10 AM

I set my 150SX 2016 to 1,10mm Sqish with Standard Head and a 0.4mm Base Gaket

| Quote
Bruce372 Bruce372
1/24/2018 6:15 PM
KTM Two Stroke wrote:

I set my 150SX 2016 to ...more

Do you know what thickness base gasket comes stock?

It sounds like stock squish is around 1.5mm and 1.1mm is more optimal

| Quote
Luxon MX Luxon MX
1/24/2018 7:40 PM
Bruce372 wrote:

Do you know what thickness ...more

Mine (2016 150SX) measured 1.3mm squish stock. Didn't measure the base gasket as I haven't taken it that far apart yet, but it's stock as well.

Billy Wight
Luxon MX
@LuxonMX
https://luxonmx.com
Motocross Components Engineered for Performance

| Quote
F1 Moto F1 Moto
1/24/2018 7:57 PM

1mm or 0.040" in proper money.
Is good for this
A touch wider if running oxygenated fuel.
Couldn't the supplier tell you this ?

F1 Moto possibly the best VHM dealer in the world !

"Performance Matters"

| Quote
Bruce372 Bruce372
1/24/2018 8:17 PM
F1 Moto wrote:

1mm or 0.040" in proper ...more

Do you know what gasket comes stock?

| Quote
honda70 honda70
1/25/2018 4:33 PM
KTM Two Stroke wrote:

I set my 150SX 2016 to ...more

with vhm head 04mm base gasket

[Moto D Racing

| Quote
honda70 honda70
1/25/2018 4:38 PM
F1 Moto wrote:

1mm or 0.040" in proper ...more

will be using c12 vhm head sx chamber what base gasket do you recommend thanks

[Moto D Racing

| Quote
F1 Moto F1 Moto
2/5/2018 5:53 PM

Base gasket thickness should not be the discussion.
It should be squish clearance.
Here's how to check it.



Hope this helps ?


"Performance Matters"

| Quote
Bruce372 Bruce372
2/5/2018 6:21 PM
F1 Moto wrote:

Base gasket thickness ...more

I know how to measure squish gap, in fact, the 2018 tc125 is 1.3mm.

It would be nice to know the stock gasket thickness so I would know what gasket to order.

I appreciate that running a thinner gasket will lower the exhaust port, but I am fine with that small amount for the sake of dialling in the combustion.

| Quote
Bruce372 Bruce372
2/5/2018 6:22 PM
F1 Moto wrote:

Base gasket thickness ...more

Btw, you and vhm make some cool youtubes

| Quote
F1 Moto F1 Moto
2/5/2018 6:32 PM
F1 Moto wrote:

Base gasket thickness ...more

Bruce372 wrote:

I know how to measure ...more

Right so you know you had 1.3mm squish.
Measure what base gasket you had in at that.
Now subract 0.2mm from the base gasket thickness to give you your desired 1.1mm squish.
Hey presto job done.

You would also be well advised to take a look at these.

https://www.f1moto.com.au/buy/ktm-125sx-2016-2018-performance-power-valve-arms/E08KT120001

"Performance Matters"

| Quote
Bruce372 Bruce372
2/5/2018 6:37 PM
F1 Moto wrote:

Base gasket thickness ...more

Bruce372 wrote:

I know how to measure ...more

F1 Moto wrote:

Right so you know you had ...more

Yeah, I didn't know ktm use different base gaskets from the factory. All the Japanese bikes I've had run 0.5mm gaskets stock.

I was hoping to order just one gasket lol.

You have some cool stuff, keep on smoking!!!!

| Quote

Post a Reply

Cool Wink Smile Tongue Laughing Shocked Sick Angry Blink Sad Unsure Kissing Woohoo Grinning Silly Pinch Sideways Whistling Evil Dizzy Blush Cheerful Huh Dry