Massive garage / parts hoard cleanout

WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/8/2016 8:32am Edited Date/Time 5/11/2016 11:04pm
Hey guys,

My game room has been my parts storage area for some tideas now and it's crowded. I'm going to be losing parts below and if you need anything let me know. I'll ship all over the US and possibly internationally.

Contact mw here or via cell

832 - five tree ate - 8()()9

I know it's a pain but it prevents fishing.

2006 YZ450F
-Front Caliper and Line
-Rear Brale Caliper and Line
-Right Crank Case Cover
-Kick Lever
-CDI, harness, and Coil

2008 CRF450R
-Magura Clutch 0120528

2006 CRF250R
-OEM Seat

2004 CRF250R
-OEM seat
-Head (needs 1 valve guide replaced and new valve)
-Cam
-CDI box, Harness, and Coilpack
-Right Radiator
-Left Radiator
-Cylinder
-Full OEM Exhaust
-Rear Shock
-Swingarm
-Frame (Bill of Sale)
-Rear Brake Assy (caliper, line, and master)
-Pegs
-Carb

02 cr125r
-seat
-transmission
-crank
-right crankcase cover
-clutch cover
-reed cage Assyria
-stator cover
-power valve ball governor
-damaged cylinder (needs replating)
-coil
-Kickstart gear assy

2001 CR250R
-Cylinder KZ3V
-Cylinder Head KZ3P E-2
-Power Valve Assy
-OEM Reed Cage
-Left Crank Case
-Transmission
-Crank
-Ignition Cover
-Powervalve Ball Governer


1999 CR250R
-forks
-seat
-rear suffrage
-airbox and boot
-OEM Expansion Chamber with Aluminum Guard
-FMF Gnarly
-Swingarm
-Rear Shock
-Triple Clamps
-Front Brake assy (Caliper, Line, Master)
-Rear Brake Caliper and Assy
-

1998 CR250
-Forks
-seat

2004 RM125
-Forks
-Swing arm
-Right Radiator
-Front Brake Caliper
-Front Master Cylinder
-Head (will need cleaned up)
-Cylinder (will need cleaned up)
-Complete bottom end (will part out as crank is shot)
-oem expansion chamber (dents n dings not terrible)

2004-06 KX250F & RMZ250
-Fluidyne Radiator set
-crank cases
-clutch assy (inner & outer baskets with pressure plate and discs)
-Trans
-stator & flywheel
-Kickstart Assyria
-
|
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/8/2016 8:33am
More to come, bear with me.
suzook241
Posts
446
Joined
3/25/2010
Location
PA US
2/8/2016 9:31am
Are you able to PM me prices and or pictures of the 04 RM forks, swing arm and head?
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/8/2016 4:30pm
I sent pics. You never responded. I'll assume you're not interested.

2/8/2016 8:02pm
What would you want for the 04 rm 125 transmission, The primary case cover and water pump cover (not including clutch cover) and the swing arm?

The Shop

WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/8/2016 8:13pm
By primary case cover I assume you are referencing the right crank case cover? The large cover that the clutch cover attaches to?

Pricing:

Trans - $100
Right Crank Case Cover - $40
Water Pump Cover - $10
Swingarm - $50

These prices are picked up in Houston. Shipping will add cost as you can imagine.
rohleder644
Posts
1053
Joined
1/18/2011
Location
Lee’s Summit, MO US
2/8/2016 8:31pm
How much for the yz front brake?
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/8/2016 8:34pm
How much for the yz front brake?
Caliper only? Master only? Caliper line and master?
Debe
Posts
2
Joined
3/1/2010
Location
IT
2/9/2016 2:06pm
How much for the Honda Cr 125 2002?
you can send me some pictures?
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/9/2016 2:18pm
Debe wrote:
How much for the Honda Cr 125 2002?
you can send me some pictures?
What do you need from it?
MxKing809
Posts
6380
Joined
10/13/2013
Location
Big Sand Whoops, MI US
Fantasy
158th
2/9/2016 5:39pm
Debe wrote:
How much for the Honda Cr 125 2002?
you can send me some pictures?
WileCyot wrote:
What do you need from it?
What's this? And do you have a silencer for it?
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/9/2016 5:43pm
Debe wrote:
How much for the Honda Cr 125 2002?
you can send me some pictures?
WileCyot wrote:
What do you need from it?
MxKing809 wrote:
What's this? And do you have a silencer for it?
You said you wanted to see the CR.... It's in a box in pieces man. Let me know what parts you want and I'll get you pics.
MxKing809
Posts
6380
Joined
10/13/2013
Location
Big Sand Whoops, MI US
Fantasy
158th
2/9/2016 6:35pm
Lol, that was the other guy asking about the entire bike. I'm after a PC silencer and want to know what reeds you have. What's "reed cage Assyria"?
Cmiller493
Posts
252
Joined
1/15/2011
Location
Hays, KS US
2/9/2016 7:59pm
Do you by chance have the carb off the 99 cr250 or the showa forks off the hondas?
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/9/2016 8:15pm
Cmiller493 wrote:
Do you by chance have the carb off the 99 cr250 or the showa forks off the hondas?
I do but it's being used on my 01.

Which showa forks are you looking for?
Cmiller493
Posts
252
Joined
1/15/2011
Location
Hays, KS US
2/9/2016 8:40pm
Dual chamber 02+ cr/crf i think I replied to another post of yours so sorry for the double posting lol
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/9/2016 8:50pm
The forks from the 04 crf250r are actually on an 01 CR250R of my buddy's.
Debegio
Posts
19
Joined
11/21/2013
Location
IT
2/10/2016 6:12am
Debe wrote:
How much for the Honda Cr 125 2002?
you can send me some pictures?
WileCyot wrote:
What do you need from it?
Sorry, the seat, thx
2/10/2016 9:53am
WileCyot wrote:
Hey guys, My game room has been my parts storage area for some tideas now and it's crowded. I'm going to be losing parts below and...
Hey guys,

My game room has been my parts storage area for some tideas now and it's crowded. I'm going to be losing parts below and if you need anything let me know. I'll ship all over the US and possibly internationally.

Contact mw here or via cell

832 - five tree ate - 8()()9

I know it's a pain but it prevents fishing.

2006 YZ450F
-Front Caliper and Line
-Rear Brale Caliper and Line
-Right Crank Case Cover
-Kick Lever
-CDI, harness, and Coil

2008 CRF450R
-Magura Clutch 0120528

2006 CRF250R
-OEM Seat

2004 CRF250R
-OEM seat
-Head (needs 1 valve guide replaced and new valve)
-Cam
-CDI box, Harness, and Coilpack
-Right Radiator
-Left Radiator
-Cylinder
-Full OEM Exhaust
-Rear Shock
-Swingarm
-Frame (Bill of Sale)
-Rear Brake Assy (caliper, line, and master)
-Pegs
-Carb

02 cr125r
-seat
-transmission
-crank
-right crankcase cover
-clutch cover
-reed cage Assyria
-stator cover
-power valve ball governor
-damaged cylinder (needs replating)
-coil
-Kickstart gear assy

2001 CR250R
-Cylinder KZ3V
-Cylinder Head KZ3P E-2
-Power Valve Assy
-OEM Reed Cage
-Left Crank Case
-Transmission
-Crank
-Ignition Cover
-Powervalve Ball Governer


1999 CR250R
-forks
-seat
-rear suffrage
-airbox and boot
-OEM Expansion Chamber with Aluminum Guard
-FMF Gnarly
-Swingarm
-Rear Shock
-Triple Clamps
-Front Brake assy (Caliper, Line, Master)
-Rear Brake Caliper and Assy
-

1998 CR250
-Forks
-seat

2004 RM125
-Forks
-Swing arm
-Right Radiator
-Front Brake Caliper
-Front Master Cylinder
-Head (will need cleaned up)
-Cylinder (will need cleaned up)
-Complete bottom end (will part out as crank is shot)
-oem expansion chamber (dents n dings not terrible)

2004-06 KX250F & RMZ250
-Fluidyne Radiator set
-crank cases
-clutch assy (inner & outer baskets with pressure plate and discs)
-Trans
-stator & flywheel
-Kickstart Assyria
-
Hey do you still have a 2004-2008 rm125 motor .
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/10/2016 9:56am
WileCyot wrote:
Hey guys, My game room has been my parts storage area for some tideas now and it's crowded. I'm going to be losing parts below and...
Hey guys,

My game room has been my parts storage area for some tideas now and it's crowded. I'm going to be losing parts below and if you need anything let me know. I'll ship all over the US and possibly internationally.

Contact mw here or via cell

832 - five tree ate - 8()()9

I know it's a pain but it prevents fishing.

2006 YZ450F
-Front Caliper and Line
-Rear Brale Caliper and Line
-Right Crank Case Cover
-Kick Lever
-CDI, harness, and Coil

2008 CRF450R
-Magura Clutch 0120528

2006 CRF250R
-OEM Seat

2004 CRF250R
-OEM seat
-Head (needs 1 valve guide replaced and new valve)
-Cam
-CDI box, Harness, and Coilpack
-Right Radiator
-Left Radiator
-Cylinder
-Full OEM Exhaust
-Rear Shock
-Swingarm
-Frame (Bill of Sale)
-Rear Brake Assy (caliper, line, and master)
-Pegs
-Carb

02 cr125r
-seat
-transmission
-crank
-right crankcase cover
-clutch cover
-reed cage Assyria
-stator cover
-power valve ball governor
-damaged cylinder (needs replating)
-coil
-Kickstart gear assy

2001 CR250R
-Cylinder KZ3V
-Cylinder Head KZ3P E-2
-Power Valve Assy
-OEM Reed Cage
-Left Crank Case
-Transmission
-Crank
-Ignition Cover
-Powervalve Ball Governer


1999 CR250R
-forks
-seat
-rear suffrage
-airbox and boot
-OEM Expansion Chamber with Aluminum Guard
-FMF Gnarly
-Swingarm
-Rear Shock
-Triple Clamps
-Front Brake assy (Caliper, Line, Master)
-Rear Brake Caliper and Assy
-

1998 CR250
-Forks
-seat

2004 RM125
-Forks
-Swing arm
-Right Radiator
-Front Brake Caliper
-Front Master Cylinder
-Head (will need cleaned up)
-Cylinder (will need cleaned up)
-Complete bottom end (will part out as crank is shot)
-oem expansion chamber (dents n dings not terrible)

2004-06 KX250F & RMZ250
-Fluidyne Radiator set
-crank cases
-clutch assy (inner & outer baskets with pressure plate and discs)
-Trans
-stator & flywheel
-Kickstart Assyria
-
Hey do you still have a 2004-2008 rm125 motor .
Yes but it needs a new crank and cylinder work. I was going to part it out entirely.
2/10/2016 10:06am
WileCyot wrote:
Hey guys, My game room has been my parts storage area for some tideas now and it's crowded. I'm going to be losing parts below and...
Hey guys,

My game room has been my parts storage area for some tideas now and it's crowded. I'm going to be losing parts below and if you need anything let me know. I'll ship all over the US and possibly internationally.

Contact mw here or via cell

832 - five tree ate - 8()()9

I know it's a pain but it prevents fishing.

2006 YZ450F
-Front Caliper and Line
-Rear Brale Caliper and Line
-Right Crank Case Cover
-Kick Lever
-CDI, harness, and Coil

2008 CRF450R
-Magura Clutch 0120528

2006 CRF250R
-OEM Seat

2004 CRF250R
-OEM seat
-Head (needs 1 valve guide replaced and new valve)
-Cam
-CDI box, Harness, and Coilpack
-Right Radiator
-Left Radiator
-Cylinder
-Full OEM Exhaust
-Rear Shock
-Swingarm
-Frame (Bill of Sale)
-Rear Brake Assy (caliper, line, and master)
-Pegs
-Carb

02 cr125r
-seat
-transmission
-crank
-right crankcase cover
-clutch cover
-reed cage Assyria
-stator cover
-power valve ball governor
-damaged cylinder (needs replating)
-coil
-Kickstart gear assy

2001 CR250R
-Cylinder KZ3V
-Cylinder Head KZ3P E-2
-Power Valve Assy
-OEM Reed Cage
-Left Crank Case
-Transmission
-Crank
-Ignition Cover
-Powervalve Ball Governer


1999 CR250R
-forks
-seat
-rear suffrage
-airbox and boot
-OEM Expansion Chamber with Aluminum Guard
-FMF Gnarly
-Swingarm
-Rear Shock
-Triple Clamps
-Front Brake assy (Caliper, Line, Master)
-Rear Brake Caliper and Assy
-

1998 CR250
-Forks
-seat

2004 RM125
-Forks
-Swing arm
-Right Radiator
-Front Brake Caliper
-Front Master Cylinder
-Head (will need cleaned up)
-Cylinder (will need cleaned up)
-Complete bottom end (will part out as crank is shot)
-oem expansion chamber (dents n dings not terrible)

2004-06 KX250F & RMZ250
-Fluidyne Radiator set
-crank cases
-clutch assy (inner & outer baskets with pressure plate and discs)
-Trans
-stator & flywheel
-Kickstart Assyria
-
Hey do you still have a 2004-2008 rm125 motor .
WileCyot wrote:
Yes but it needs a new crank and cylinder work. I was going to part it out entirely.
What's your cell number I'll Tex you pics of what my motor did and can you send me some of yours please thanks jess
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/10/2016 10:11am
Hey do you still have a 2004-2008 rm125 motor .
WileCyot wrote:
Yes but it needs a new crank and cylinder work. I was going to part it out entirely.
What's your cell number I'll Tex you pics of what my motor did and can you send me some of yours please thanks jess
It's at the top.
MxKing809
Posts
6380
Joined
10/13/2013
Location
Big Sand Whoops, MI US
Fantasy
158th
2/10/2016 11:55am
MxKing809 wrote:
Lol, that was the other guy asking about the entire bike. I'm after a PC silencer and want to know what reeds you have. What's "reed...
Lol, that was the other guy asking about the entire bike. I'm after a PC silencer and want to know what reeds you have. What's "reed cage Assyria"?
So do you have a cr125 silencer and what kind of reed cage is that?
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
2/10/2016 12:08pm
MxKing809 wrote:
Lol, that was the other guy asking about the entire bike. I'm after a PC silencer and want to know what reeds you have. What's "reed...
Lol, that was the other guy asking about the entire bike. I'm after a PC silencer and want to know what reeds you have. What's "reed cage Assyria"?
MxKing809 wrote:
So do you have a cr125 silencer and what kind of reed cage is that?
Stock reed cage and stock silencer.
2/10/2016 12:53pm
WileCyot wrote:
Yes but it needs a new crank and cylinder work. I was going to part it out entirely.
What's your cell number I'll Tex you pics of what my motor did and can you send me some of yours please thanks jess
WileCyot wrote:
It's at the top.
Ok I sent you a Tex
Jim in VA
Posts
297
Joined
3/4/2016
Location
Louisville, KY US
3/4/2016 9:49pm
She said send pics of yours, she'll send pics of hers. Woohoo
WileCyot
Posts
459
Joined
9/23/2014
Location
Katy, TX US
3/5/2016 5:11am Edited Date/Time 3/5/2016 5:11am
If the Rm 125 engine is still available email me a price and some pics to skyracing@comcast.net
The engine is torn down in a box currently. What parts do you need?
4/27/2016 5:34pm
What is missing from the cr125 engine? And how much for all the engine parts?

Post a reply to: Massive garage / parts hoard cleanout

The Latest