Create New Tag
walkitoff walkitoff
6/30/2018 10:56 AM

Hey all!

Just wanted to put up a review of my experience with Enzo racing, specifically Craig Decker. I apologize ahead of time for the length but I think it all pertains.

I'm 34 years old, haven't ridden a dirt bike since I was 22, rode and raced from about 8 til 16, then intermittent riding from 16 to 22. I'm currently not in the best of shape and don't have the same skill level I once did. The last bike I had prior to my hiatus was an ‘08 CRF 450 with FC suspension work… and it was amazing. It was the best bike I had ever had.

Fast forward to two falls ago and I came out of my hiatus and purchased a ‘14 RMZ 450. The bike turned awesome but the forks were quite harsh and due to my ability (or lack of) the engine was kicking my butt. It was just too much. With my weight (220) I thought I had to have a 450. Even after suspension work by a local racetech guy I wasn't happy. And that is no knock to him, he does great work, just the SFF stuff didn't suit me. Talking with a friend he had a ‘16 350 SX-F and loved it (besides the 4CS), said it would be perfect for me. Being the compulsive person that I am, I immediately looked in the local area and the shop nearby didn't have the KTM but a ‘17 FC 350. I jumped and sold the RMZ and got the FC.

With the first ride I was instantly more comfortable. It was enough power and broad enough to do whatever I needed it to, but felt nimble enough to where I didn't feel like I was always fighting with it like the 450. I did some work to the air box to get a little more low end grunt and changed the gearing, the bike was getting better and better.

Through all of last summer I tried to dial the suspension in but couldn't get it to where I wanted it. It felt like it was dancing a bit much and was deflecting. I couldn't get it to plant the way I wanted it to. After reading a bunch on the suspension it seemed it was a fairly common complaint and most tuners stated the first ⅓ of the stroke could use some work. So… I started shopping.

After talking with numerous suspension tuners it seemed like everyone was starting around 1K to do what I wanted. Whether it was special coatings, finishes, or “upgrade kits”, there was always something more than a revalve that they wanted to do… except Craig Decker of Enzo. Talking with him really sold me. He was friendly, knew the suspension, and was confident he could get me what I wanted with minimal cost. He had two other, more expensive options, but actually thought the revalve would give me a better result with my wants. I was sold! Packed up the suspension and sent it out that Friday. I ended up adding an xtrig preload adjuster for ease of setup, and it was still around $300.00 cheaper than most others!

The suspension came back, packed well, with a free shirt and a sheet of the recommended settings. I bolted it up, set the sag, and went out to a private track the next day.

With a few clicks up front and a half turn on the high speed compression out back, the bike was dialed. It was night and day from stock suspension. Plush, stable, confidence inspiring are the words that come to mind. The bottoming resistance was superb for my slow man jump casing. The rear tracked and handled the rollers no problem. No pogo effect at all. Just absorbed everything and kept the rear driving. I don't know what voodoo magic Craig Decker has up his sleeve, but this is the best suspension I've ever ridden. I was so impressed, but I didn't know if it was just me having a placebo effect. So I took it over to a friend of mine who has his own track. He owns an older Husky CR 125 with racetech, a 2016 YZ250F stock, and a 2008 CRF 250 with FC suspension. He took the Husky for a spin, and from the hooting and hollering he was doing I could tell he liked it. He didn't ride the bike stock, but he couldn't believe how amazing the bike was. Also claiming it’s the best he's ever ridden...

This is just my experience and my opinion, but if you have WP suspension, before sending it out for bookoo bucks, contact Enzo racing. Specifically Craig Decker. He works magic! I am so pleased with it, more so than any other bike I've had. If you live in the western NY area and want to ride it to see for yourself I'd be more than happy to let you send it on one of the open practice nights at the local tracks… that's how confident I am people would love it.

Hope this helps anyone looking for suspension work for their WP stuff. Stay safe out there and keep the rubber side down!

| Quote
Henry_Van Henry_Van
7/10/2018 5:57 PM

Craig does excellent work been using him for years he did a kyb conversion to my 17 350sxf

| Quote
Paul333 Paul333
9/13/2018 11:17 AM

I can also vouch for Craig Decker/ENZO suspenion. He revalved my 2015.5 KTM SX-F 450 FE suspenion. His settings were spot on, I was very impressed. His customer service was equally impressive.

| Quote
slipdog slipdog
10/9/2018 9:19 AM

Good review!

I don't know how much bike testing he gets to do(I assume plenty) but you can't go wrong with a tuner that was a top level racer and test rider. Craig is good people and no, you don't need to spend close to $1k to make the Wp stuff work well.

| Quote
erik_94COBRA erik_94COBRA
11/6/2018 9:30 AM

I planned on making a similar post about Craig as well. He's done all 3 of my bikes and each have exactly done what I wanted.

First was my '17 Husky TC250 that have a set of WP CC spring forks. It is great. Next was my '14 KTM 150SX. It is also great. Last was my '18 Honda CRF450. It too is great (but I don't think I'm a 4-stroke rider as much as 2-stroke).

The WP components perform great when setup well and he/Enzo have very good settings. Easily as good as the Showa on my Honda and very close to the legendary KYB SSS.

| Quote
Talisker Talisker
11/25/2018 5:33 AM

Ive also had Craig do quite a few sets of suspension. Quick turnaround, excellent suspension.

| Quote
Denn700 Denn700
2/20/2019 4:41 PM

He has done my stuff for years. He did a spring conversion on my 350 and it was great. I guess I had some money burning a hole in my pocket because I am picking up my bike with KYB kit Suspension this week.

| Quote
slimchugga119 slimchugga119
4/20/2019 6:34 PM
Henry_Van wrote:

Craig does excellent work ...more

| Quote
slimchugga119 slimchugga119
4/20/2019 6:36 PM
Denn700 wrote:

He has done my stuff for ...more

How much did he charge you for the kyb conversion?

I have 18 aer 48s kicking my ass.. revalved/resprung still can’t get comfortable. Been looking into kyb conversion but can’t seem to find out a price

| Quote
mxnick mxnick
6/29/2020 7:15 AM

I assume this is the same Craig Decker who used to be quite fast in the early ‘90s and had the Honda Of Troy ride?

| Quote
vdrsnk04 vdrsnk04
7/13/2020 7:56 AM

He did fantastic on my KYB kit stuff on my yz250f. I’ll continue using him with all my stuff!

2015 Husqvarna FE501s
2018 Husqvarna TX300
2019 Yamaha YZ250F

| Quote
douglasredding douglasredding
7/23/2020 6:30 PM

Craig is a good man. I've been on rider support with Enzo since 2004 and they have done all of my YZs. There has only been one revalve/rebuild where I had to take it back and Craig was honest and told me they had a very new tech work on my forks. When they corrected it, I swear they put A-Kit internals in the damn was like cheating. So good. I'm a fan of ENZO...always.

"Never do something permanently foolish just because you are temporarily upset..."
-----------------------------------My Vital MX Bike Check Page--------------------------------

| Quote
mx317 mx317
7/27/2020 1:00 PM

Craig is top notch! He did my Cone Valve WP forks and they work better than they ever have.

Take it to the limit, one more time!

| Quote

Post a Reply

Cool Wink Smile Tongue Laughing Shocked Sick Angry Blink Sad Unsure Kissing Woohoo Grinning Silly Pinch Sideways Whistling Evil Dizzy Blush Cheerful Huh Dry